I also have a question, the front cylinder loses pressure, the cup is left, but it does not lose oil, I also changed the gaskets and it was also repaired, the cylinder is almost new, I would like to know if anyone has suffered something like this, and where could the problem be, thanks !!!!
Manitou 845-120 front cylinder problems
- Thread starter Allex2705
- Start date
is the cylinder good, to be made of something else? I can put a video
youtube.com
Manitou 845-120 h
youtube.com
- Location
- Oxon
is the cylinder good, to be made of something else? I can put a video
Manitou 845-120 h
its simple, its leaking ram seals or the check valve. Nothing else can cause it.
Assuming you have fitted the correct seals and the ram is not scored in side then replace the check valve.
Ok, yes I changed the gaskets, the rod is new, I will look at the valve, but if you tell me where it is located, thank you !!!
- Location
- Oxon
Look in the cylinder for scoring not rod. And valve is bolted to the ram.
Dont look at the valve bolt a new one on. You cant service them.
the cylinder is good, the rod is good too, it remains to change the check valve, do you know any site where to order?
- Location
- Oxon
Where abouts are you?
- Tags
- repairs
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk