manitou mt 625 not driving

[eomachinery]

hi all, i have an issue with my manitou 625, it will not go forwards or reverse, hydraulics will not move unless the parachute button is pressed and the rev counter is not working.
the alternator is charging good at 14.6 volts (could this be too much)
all wiring checked so far looks ok, the joystick disable button seems to be working okay and is not stuck on.

only thing baffling me is that there is an error message on the dash which just says "plu6'd" this is displayed and the load monitor lights are flashing and the buzzer is going off, does anyone know what that means?

any help much appreciated. Thanks

 

[ACEngineering]

hi all, i have an issue with my manitou 625, it will not go forwards or reverse, hydraulics will not move unless the parachute button is pressed and the rev counter is not working.
the alternator is charging good at 14.6 volts (could this be too much)
all wiring checked so far looks ok, the joystick disable button seems to be working okay and is not stuck on.

only thing baffling me is that there is an error message on the dash which just says "plu6'd" this is displayed and the load monitor lights are flashing and the buzzer is going off, does anyone know what that means?

any help much appreciated. Thanks

I've not got much experience with this model unfortunately, the error code isn't making a lot of sense either IMO i dont think thats a code at all IMO I think you have to press the button on the dash clock to cycle the error codes?

 

[ACEngineering]

hi all, i have an issue with my manitou 625, it will not go forwards or reverse, hydraulics will not move unless the parachute button is pressed and the rev counter is not working.
the alternator is charging good at 14.6 volts (could this be too much)
all wiring checked so far looks ok, the joystick disable button seems to be working okay and is not stuck on.

only thing baffling me is that there is an error message on the dash which just says "plu6'd" this is displayed and the load monitor lights are flashing and the buzzer is going off, does anyone know what that means?

any help much appreciated. Thanks

 

[eomachinery]

brilliant thanks, will have a look at this tommorow. yes i havent seen the plu6 d thing before either, hopefully i can get some codes. much appreciated.

 

[noagain]

brilliant thanks, will have a look at this tommorow. yes i havent seen the plu6 d thing before either, hopefully i can get some codes. much appreciated.

Did you find out what this fault code is?