manitou

Hi, the pin on the top hinge of the bottom door has snapped. I have removed the grease points and little clips on base of pins. But can’t get the door to lift off the bottom pin. It will come up about 1cm but no more. Is just more brute force required? Have tried levering between top hinge...

COOLANT PUMP FAILURE what could cause the failure of the water pump on the Manitou 630-105 (2019)? Deutz engine 5000h, we used JD cool gard 2

Hi, Got a job on Thursday so doing the right thing and gave the Manitou 627 Telehandler a service. I've done hydraulic, Fuel and Engine. Plus dropped and cleaned the water trap. It now stumble on idle like there is air or air leak in the fuel....but I sure cant find it. Is this common after...

Hi all. Our forklift has lost drive in 2nd, 3rd & 4th. You can feel it try to move forwards or backwards but almost doesn't have the torque? In 1st gear with high revs, and the wheels straight it just about moves. I then drained the gearbox atf oil, and found the gauze was all blocked with...

Have a 2004 MLA 628, great loader very strong and in good condition, Iv recently have had a problem with starting it, Iv changed the battery to a new one, changed the starter also. There is a click when I turn the key but won’t start, Iv had 2 mechanics looking at it and they couldn’t figure...

I have a manitou mt625 and I can’t get the boom to move at all. I have forward and reverse but no other controls on the boom work. I’ve checked all the fuses but all were good.

Hi looking for some help. My Manitou 932 has started shuddering in reverse. The first thing I noticed was the reversing beep starting to stutter then the machine started to stutter/shudder when reversing. No problem going forwards. When put into reverse gear it starts moving fine but...

In this episode, we take a look at the new mini mover from Manitou, the ULM 412 H telehandler. FULL VIDEO AT LandPowerTV.com Featured machine: Model: Manitou ULM 412 H Lift capacity: 1,250kg Lift height: 4.3m Forward reach: 2.62m Engine: 3-cylinder, 1.6-litre, Yanmar Power: 35hp Torque: 105Nm...

Hi! My manitou wont start anymore. It started whit that i was starting it up and drow it for i short bit then i got out and let it run. I got back after a while and notist that it hade shut itself off. Now it wont start, it flashes between the rabit and the turtel on the display. It seems to be...

Hi there. So, I got myself a Manitou 634 loader, second hand and without knowing much about it...So my fellow romanian seller did what most of the sellers do here, and that it is not telling anything about the problems the telehandler had :ROFLMAO: So, after a quick check, I've found some minor...

In this review, we try out the latest generation flagship Manitou MLA pivot steer telehandler. FULL VIDEO AT LandPowerTV.com Featured machine: Model: Manitou MLA-T 533-145 V+ Engine: 4.038-litre, 4-cylinder, Deutz Power: 143hp Transmission: 40kph, M Varioshift, hydrostatic Differentials...

Looking for any help with the below error. Engine has gone in to limp mode with delayed power and engine warning light flashing. many help would be greatly appreciated.

Hi, I’m having a problem with my manitou, basically all hydraulic functions work perfectly however if the steering wheel isn’t moved for around 10-20 seconds, all functions stop until the steering wheel is moved again, only a slight movement is needed, there are no warning lights and all...

CLICK HERE FOR THE FULL REVIEW Now featuring the firm's clever Dual Tech Variable Transmission, we try out JCB's 532.60 AgriSuper Loadall telehandler. Specifications: Featured model: JCB Series 3 532.60 AgriSuper Loadall Lift height: 6.22m Lift capacity: 3.2t Hydraulic pump capacity: 140...

BRAND NEW and UNUSED LED dual beam headlamps RHD - suitable for some Telehandler or Fastrac or Sprayer. Premium brand and quality come with 6 pin square deutsch plug in housing of each headlamp. Price is for one pair. £150 no vat includes UK mainland postage.

Good morning Hoping someone can give me advice.... We have a Manitou MT 732 and 845 and looking to use them to load a walking floor with wood chips (4.3m high, 107m3). Standard bucket is far to small! And suggestions on sizes? Dry chips around 270kg/m3 and the wetter probably up to around...

Hi there dose any body know what fault code dtc00065.10 means thanks

Now then. This week we've got Manitou's latest MLT 630 telehandler on-test, which features quite a few updates. As ever, if you have any questions or thoughts on the new machine, just let us know and we'll try and answer your questions as we use the machine this week. Then in a few weeks time...

This Manitou rough-terrain forklift was built on an international harvester tractor. The number of the tractor is A48000B00665. What type of tractor is this and when was it built? Is this number also the number of the whole machine? We need this information to be able to register this rough...

I have a 627 (2007) which is pumping the oil out of the sump into the water system. Waterpump and oil cooler changed. Head pressure tested and new head gasket fitted. Still pumping oil into water Any ideas???