Hi all.
I have a minor issue with my mx 80 loader fitted to my 4355.
So the loader won't lift after a point when revving higher than 1400. A different point each time , and will go up again if I let it rest , then sticks again.
It works on the linkage setting but not on the loader setting.
The oil level in the back end is good.
I have a minor issue with my mx 80 loader fitted to my 4355.
So the loader won't lift after a point when revving higher than 1400. A different point each time , and will go up again if I let it rest , then sticks again.
It works on the linkage setting but not on the loader setting.
The oil level in the back end is good.