MF 6400 air cab suspension bellows

[will_mck]

Any one know where I can get one of these without having to pay hundreds of pounds extra for the privilege of having the official MF plastic wrapper it comes packaged in?.... Trying to cut back on my plastic waste of course

 

[davidroberts30]

try ernetek

 

[Farmer_Joe]

fill you old one with that green tyre seal, that hat i did with mine still going strong.

 

[will_mck]

That's not a bad idea! Mine is 14 years old now and you can see the hair line cracks on the outside so I think I'll need a new one in the long run

 

[daveydiesel1]

Any one know where I can get one of these without having to pay hundreds of pounds extra for the privilege of having the official MF plastic wrapper it comes packaged in?.... Trying to cut back on my plastic waste of course

Take it to local motor factors that do lorry stuf. They bound to have somethin pretty similar from some lorry out there

 

[Bullring]

Take it to local motor factors that do lorry stuf. They bound to have somethin pretty similar from some lorry out there

That's what I plan to do with mine when I get time to take it off, my fitter who is an ex MF dealer fitter said they are about £60 from a lorry motor factor whereas MF dealer wants over £300. What model is it from?

 

[davidroberts30]

If you get the time to match it up see if you can post the part number on here?

That's what I plan to do with mine when I get time to take it off, my fitter who is an ex MF dealer fitter said they are about £60 from a lorry motor factor whereas MF dealer wants over £300. What model is it from?

 

[Blue.]

4273315M91 Massey Ferguson — SHOCK ABSORBER | eBay

A nti vibration.

www.ebay.com.au

Any one know where I can get one of these without having to pay hundreds of pounds extra for the privilege of having the official MF plastic wrapper it comes packaged in?.... Trying to cut back on my plastic waste of course

 

[davidroberts30]

4273315M91 Massey Ferguson — SHOCK ABSORBER | eBay

A nti vibration.

www.ebay.com.au

I seen that but thought haulage would kill it?‍?

 

[e3120]

I thought the accepted solution now was to fit the 5400 spring/damper assembly and be done with it.

 

[mf7480]

I thought the accepted solution now was to fit the 5400 spring/damper assembly and be done with it.

works well, but am I the only one to find the transmission noise in The cab is almost unacceptable having done the mod?

 

[will_mck]

Found one of these since, the local lorry component business ordered it in for me, it cost about £110! I gave MF around £300 for the previous one.... not a bad mark up for added fancy plastic bag and holographic sticker

 

[davidroberts30]

Perfect??

 

[Farmer_Joe]

Top job, well done for posting

so 4273315M91 can be replaced by SABO SA 520479, just writing it down for future google searches!

 

[Rust]

Top job, well done for posting

so 4273315M91 can be replaced by SABO SA 520479, just writing it down for future google searches!

I googled above numbers and only kramp part came up [emoji848]

 

[will_mck]

Any lorry component business that order's stuff from SABO will get it for you, the Product number is SA 520479