New Holland air fitting

[Ollie6070]

Could anyone tell me what this fitting is called? It’s leaking where the 90 degree goes into the nut part. It’s on a new Holland going into the left air tank . Thank you

 

[Lofty1984]

1/4 inch tread on it probably so just look for an elbow with that thread, have you tried ptfe tape on it or is it split

 

[ianm641]

you can get new unions easy enough but before you fit a new one make sure you can pull the air pipe down a bit as you will have to cut 1/2 inch of the air pipe to push into new fitting. have you tried to tighten the locknut sometimes works.

 

[Ollie6070]

You can move the elbow by hand to stop it leaking but the nut is in tight, it’s where the right angle goes into it

 

[Lofty1984]

You can move the elbow by hand to stop it leaking but the nut is in tight, it’s where the right angle goes into it

Take the whole thing out and put ptfe tape on the threads

 

[cosmagedon]

It's called a Voss air fitting, you can buy repair kits for them

 

[Ollie6070]

It's called a Voss air fitting, you can buy repair kits for them

cheers I’ll look