New Holland T6030 Intelliview IV

[Leachy_n]

Hi All, I have installed an Intelliview IV in a NH T6030 elite for the purpose of running ISOBUS implements, basically for the use of virtual terminal (went down the line of using Intellview IV as this is not the primary tractor and display will be in primary tractor as the second intelliview IV). The Harness installed was a New holland ISOBUS kit, this had numerous different connectors through the loom to allow different add on's. My question is has anyone ever connected one of these to the tractor Canbus or is it even possible to connect to the tractor can bus to allow the intelliview IV to show any of the tractor parameters or engine management information that is available on this more basic style of tractor, not a necessity, just wondering if it was possible at all? Cheers

 

[tealdog038]

We had a spare IV screen that was used for a vt that we put in a t7. 210 that had a intelliview 3, all the tractor info had to be input into the screen by laptop not a plug and play.

 

[Leachy_n]

We had a spare IV screen that was used for a vt that we put in a t7. 210 that had a intelliview 3, all the tractor info had to be input into the screen by laptop not a plug and play.

Ive heard of that before but the tractor has not come from factory with an intellivew option, so seeing if I can adapt and intelliview to the tractor.. I dont think I can just thought id ask