Patchwork Eco Plus

[Joe]

Anyone have a pdf instruction manual for a patchwork eco plus? Have the quick starter guide but have lambing brain and think need the full manual but can’t find it online.

 

[Bury the Trash]

Product Support | patchwork-technology

www.patchworkgps.com

Scroll down, see 'Black box eco plus '

 

[Jerry]

Anyone have a pdf instruction manual for a patchwork eco plus? Have the quick starter guide but have lambing brain and think need the full manual but can’t find it online.

Have the mobile of the guy that dies their support if it helps?

 

[Bury the Trash]

Sorry,I see now that you have the quick start instr.

 

[Joe]

Right before I ask this been lambing for 3 weeks on my own so brain is fried and it’s probably really simple.

been messing with a blackbox eco plus last few days and think I have it but confused. Am I right drive into field do the boundary first (thought would be able to save fields but not seemingly).
When the boundary is done pick a point A on one headland & drive straight to other headland picking a point B. Then when turn around at that headland guidance line should show auto picking up next points A&B based on which way I turned?
Is that it or am I missing something with it......

 

[milkloss]

I've got the advance with white reciever. I know it's different to yours but when I map a new field I 'start job' the select 'new', entered the field name and then chase the boundary.

edit to add: yes, I usually set the A-B when doing the boundary, pick the straightest edge that bows into the field if that makes sense. The first run then has some overlap and the rest are straight on.

 

[Joe]

I've got the advance with white reciever. I know it's different to yours but when I map a new field I 'start job' the select 'new', entered the field name and then chase the boundary.

edit to add: yes, I usually set the A-B when doing the boundary, pick the straightest edge that bows into the field if that makes sense. The first run then has some overlap and the rest are straight on.

right so can set AB same time as doing the boundary then go back once closed boundary, that makes sense. The green area should it all touch, as when messing about today there was a gap even when following line correctly

I’m usually really good with tech and have written specs for other tech and all, this just has me slightly for some reason

 

[milkloss]

right so can set AB same time as doing the boundary then go back once closed boundary, that makes sense.
You can on mine but it's a different model don't forget.

The green area should it all touch, as when messing about today there was a gap even when following line correctly
If you mean the covered/treated area then there shouldn't really be any gaps on the screen when a bout is finished. Sometimes it will not fill an area until a certain distance is covered or the angle of travel changes a certain amount and then it will suddenly get filled on screen. This is adjustable on my unit.
I’m usually really good with tech and have written specs for other tech and all, this just has me slightly for some reason

 

[Joe]

Thanks a million did some spraying and worked exactly as you said, just need to work out if can save fields now...

 

[milkloss]

Thanks a million did some spraying and worked exactly as you said, just need to work out if can save fields now...

no problem. Someone above linked to the support page for patchwork so if you look for the advance/go with white reciever is my model.