What are the measurements for attachments in this headstock in Matbro?
What is the factory distance in attachment from locking pin hole to the surface that touches the headstock pallet fork holders?
I have albutt bucket that fits perfectly but now I bought pallet forks and bale handler locally. They won't lock, cones do work but attachment stays about 1 cm too far that locking pins would work.
If I have to modify, easiest would be cut out headstock cones and move them 1cm forward but this will be bucket loose. Otherwise need to cut open both attachment and move cone holes the same distance.
Is there some difference between Manitou/Matbro versions?
Cut and weld or do I have chance to complain those measurements?
What is the factory distance in attachment from locking pin hole to the surface that touches the headstock pallet fork holders?
I have albutt bucket that fits perfectly but now I bought pallet forks and bale handler locally. They won't lock, cones do work but attachment stays about 1 cm too far that locking pins would work.
If I have to modify, easiest would be cut out headstock cones and move them 1cm forward but this will be bucket loose. Otherwise need to cut open both attachment and move cone holes the same distance.
Is there some difference between Manitou/Matbro versions?
Cut and weld or do I have chance to complain those measurements?