Plough sub soiler points / fittings.

[colhonk]

Seem to remember years ago that there was some sub soiling fittings to bolt onto plough shares, are there still such things to fit Kverneland ploughs,If so are they any good?

 

[Bald Rick]

This what you want?

Parts Lists, Diagrams, Part number lookup for tractors and other Agricultural machinery | UK branded tractor spares

Tractor parts, spares and accessories for modern & vintage tractors. We are the largest UK online supplier of Sparex replacement parts and agri supplies

www.malpasonline.co.uk

 

[fredf]

This what you want?

Parts Lists, Diagrams, Part number lookup for tractors and other Agricultural machinery | UK branded tractor spares

Tractor parts, spares and accessories for modern & vintage tractors. We are the largest UK online supplier of Sparex replacement parts and agri supplies

www.malpasonline.co.uk

[/QUOTE]

Those are to make the last furrow wider for tractors with wide tyres they cut the furrow wall and remove the hard edge.

Tom

 

[Bald Rick]

This what you want?

Parts Lists, Diagrams, Part number lookup for tractors and other Agricultural machinery | UK branded tractor spares

Tractor parts, spares and accessories for modern & vintage tractors. We are the largest UK online supplier of Sparex replacement parts and agri supplies

www.malpasonline.co.uk

Those are to make the last furrow wider for tractors with wide tyres they cut the furrow wall and remove the hard edge.

Tom
[/QUOTE]

Thought crackers worked below the mould board to break previous pans?

 

[le bon paysan]

I think Dowdeswell had something on the bottom of their plough bodies, looked like rotovator blade bolted on. It went down about 5 inches under the ploughing depth.

 

[Adeptandy]

Lemken did a subsoiler, have 4 in the shed somewhere

 

[Happy]

Lemken did a subsoiler, have 4 in the shed somewhere

The do. Not a bolt onto the share type job though.
Needs bracket that carries them bolted to frog/leg.
They do a good job in the right conditions if no stones.

 

[Adeptandy]

The do. Not a bolt onto the share type job though.
Needs bracket that carries them bolted to frog/leg.
They do a good job in the right conditions if no stones.

....or Bog Oaks

 

[CPF]

We used to use them Got to be careful when you’re dropping the plough down
On a 5 furrow plough
One on the front , one in the middle, and one on the back
Use to do a good job when it was dry
If you cannot get them for kv
You can still get them for a dowdeswell You could buy one see if it would bolt on or welded them on

 

[CPF]

 

[CPF]

 

[Bury the Trash]

View attachment 950540View attachment 950541

They work well ime .....but best on fairly deep stone patch free ground

 

[CPF]

This what you want?

Parts Lists, Diagrams, Part number lookup for tractors and other Agricultural machinery | UK branded tractor spares

Tractor parts, spares and accessories for modern & vintage tractors. We are the largest UK online supplier of Sparex replacement parts and agri supplies

www.malpasonline.co.uk

Those are to make the last furrow wider for tractors with wide tyres they cut the furrow wall and remove the hard edge.

Tom
[/QUOTE]
A little bit of info
I swear by these now we are on 650 and 710 tyres

I