Pilgrimmick
Member
- Location
- Argyll
When talking about throttles, what is the standard connector? Red or blue bailer twine?Who said anything about shutting the throttle before selecting R?
When talking about throttles, what is the standard connector? Red or blue bailer twine?Who said anything about shutting the throttle before selecting R?
Wanted a trolly for my kayak......
......didn't want to spend money
View attachment 570220
Axle and wheels came off a off road skate board I found in a ditch some number of years ago = full suspension trolly
The black bits slot in to holes in the kayak......they are surplus angle grinder side handles
View attachment 570222
Sit in or sit on ?
I've just put a 12V outboard on dingy, its surprisingly good to use, would be great on a kayak
Blue twine for throttleWhen talking about throttles, what is the standard connector? Red or blue bailer twine?
Suppose that counts as a bodge, it is not the regulation blue bailer twine, if it was it would have had to go in the engineering thread.Throttle cable broke on 6190 dealer won't have one till Wednesday no problem
I trapped a fox in our hen house, but the fudger dug his way out, through a wooden floor too, if I had got out of bed 2 minutes quicker I would have got himToday we brought Fort Chicken into use. Half a dozen laying hens in (non) retirement.
View attachment 572338
Could just be a big fox trap?
Today we brought Fort Chicken into use. Half a dozen laying hens in (non) retirement.
View attachment 572338
Could just be a big fox trap?
2 of 100x50 mm box 7ft longAdvice please , we have a herbst 8t dropside trailer which i would like to add a 4ft extension to. it has two 100mm by 55mm slots in the back ready for it .trailer is7' 2" wide, 50mm from slot to trailer bed.
What steel should i order to make a strong job?
thanks
Advice please , we have a herbst 8t dropside trailer which i would like to add a 4ft extension to. it has two 100mm by 55mm slots in the back ready for it .trailer is7' 2" wide, 50mm from slot to trailer bed.
What steel should i order to make a strong job?
thanks
The 100×50 box will need to be at least 6mm wall or need strengthened. Made ours with 5mm wall and it isn't strong enough, it bent where the trailer ends and the extension starts.2 of 100x50 mm box 7ft long
4 of 7 ft long 50mm box
Some steel plate
Angle or channel to go on sides
The 100×50 box will need to be at least 6mm wall or need strengthened. Made ours with 5mm wall and it isn't strong enough, it bent where the trailer ends and the extension starts.
True, but if you need the extension to slide into channel as I did you have to use box100x50 parallel flange channel will be stronger than 100x50x6.3 box
My Collins trailer has channel for the extension, that's factory made100x50 parallel flange channel will be stronger than 100x50x6.3 box
I agree it needs to be thick walled, but I don't know what is thick enough and what is overkillThe 100×50 box will need to be at least 6mm wall or need strengthened. Made ours with 5mm wall and it isn't strong enough, it bent where the trailer ends and the extension starts.