305 x 50 with a 50mm hole through the centre. 2 semicircular scalops cut out but not right through.
Ransome plough
- Thread starter madmatt
- Start date
305 x 50 with a 50mm hole through the centre. 2 semicircular scalops cut out but not right through.
madmatt
Member
Many thanks Howard much appreciated., i have seen pictures just wanted the dimensions so i can get a price off the profilers next week.
This is mine. Weld the thinner lugs back in to give you the handles. Got them done out of 60 which is just a bit heavier. Original are 2”. Machined them back down to 305 dia.
Mydexta
Member
- Location
- Dundee/angus
What weight is in those????
Dealer
Member
- Location
- Shropshire
33.10165611kg or thereabouts roughly speaking
Now then owd Howard old chap I think uv got thee sums wrong the paint including undercoat and some rust will push them up a few grams tho nowst
Kinnel. Splitting hairs now. Would have been even heavier 20 years ago when we had lead in it! That’s unless you are using pylon paint that takes two of you to lift a tin!
massey765
Member
- Location
- nr clitheroe lancs
that pylon paint was a bast@rd to grind and weld .......old boss was tight and elf n safety did not come into the equationKinnel. Splitting hairs now. Would have been even heavier 20 years ago when we had lead in it! That’s unless you are using pylon paint that takes two of you to lift a tin!
Get three done as the drawing and 3 done as circles, then weld one of each together. Job done!