Replacement door glass for Case / Sprayer.

[Aceface]

As the title suggests, I have broken the glass panel in a 1999 Case SP3000. Does any one know from where I could scource a replacement, such as a breaker with one in stock?. (Case list the glass as being out of stock). Many thanks in advance.

 

[Tim G]

Same as a Gem sprayer?

 

[8 Ace]

Same as a Gem sprayer?

Probably not. I believe the cabs were different.

 

[Hard Graft]

Are the early case gem ones not flat glass if so get you glass fitters to cut some laminate

 

[Aceface]

Thanks Hard Graft for replying, the door is indeed flat glass, but was told that laminate would be too heavy for the frame and hinges. I have no experience of laminate so perhaps I need to investigate this further.

 

[Zebbedee]

Plant glazing will be worth a call

 

[db9go]

As the title suggests, I have broken the glass panel in a 1999 Case SP3000. Does any one know from where I could scource a replacement, such as a breaker with one in stock?. (Case list the glass as being out of stock). Many thanks in advance.

Is that not the same as a New Holland TX combine or forager

 

[Stuart J]

@Graham Smith

 

[Aceface]

Is that not the same as a New Holland TX combine or forager

I believe the Case SP3000 can be found with three different cabs. The first one ( with smaller windows) was the Gem Saphire sprayer simply painted Case red, then the cab changed to the one we have, and then final production models of the sprayer featured the "combine cab" as you mention db9go.

 

[Blue.]

Thanks Hard Graft for replying, the door is indeed flat glass, but was told that laminate would be too heavy for the frame and hinges. I have no experience of laminate so perhaps I need to investigate this further.

There’s different thickness of glass available,I’d call plant glass.

 

[db9go]

As the title suggests, I have broken the glass panel in a 1999 Case SP3000. Does any one know from where I could scource a replacement, such as a breaker with one in stock?. (Case list the glass as being out of stock). Many thanks in advance.

If you can show a photo of the cab that would help

 

[Tim G]

Would it be like this one?

 

[RAF]

Try
Central crop sprayers
Avison sprayers
Clean acres sprayers

google is your friend

 

[yellow belly]

Get a Perspex one made if no one else can make one

 

[Stuart J]

View attachment 1113696
Would it be like this one?

Is the cab on that one the same as on my Emerald @Graham Smith ? Except that one the doors hinge the other way....which seems a much better way.

 

[Aceface]

View attachment 1113696
Would it be like this one?

Thanks Tim G, this is exactly the same cab as is on our sprayer, and brilliantly the cab door is superbly visable.

 

[Aceface]

Is the cab on that one the same as on my Emerald @Graham Smith ? Except that one the doors hinge the other way....which seems a much better way.

I believe (but I don't know for sure), that the first production runs of Case SP sprayers were literaly Gem Saphire/Emerald sprayers painted Case red, then small diferences appeared in later models such as a cab redesign (one of which we have), but it wasn't until the final few models were made where the Case/ New Holland universal cabs were intregated.

 

[MrNoo]

If its flat just get some cut, I got a full set cut for when I rebuilt my burnt out Agribuggy, I did buy the front screen though. Laminated comes from 6mm upwards, normal glass they'll cut and bond in while you wait. Not overly expensive either, almost certainly cheaper than one over the counter

 

[Graham Smith]

Is the cab on that one the same as on my Emerald @Graham Smith ? Except that one the doors hinge the other way....which seems a much better way.

How old is your Emerald, early ones had a different cab. @Aceface is it item 3 that you are after?

 

[8 Ace]

I am brother to Aceface and yes Item 3 does seem to be the right bit. I had assumed the glass would be a single item but as the metal frame is not itemised then is it correct to assume the frame and glass are paired together as a single item? Our sprayer is badged as a Case SP3000 but that does look to be the correct bit as in the photo above.