Rotovator Nerds

[MRT]

Anyone know what will fit/where I can find blades for a Chineseium Housemartin rotovator? Or do I buy something out of spec and drill/bolt/weld it on. Looking through Sparex etc all the options seem slightly different to what I have.

 

[steveR]

Look on eBay....

It's where a lot are sold from, and the suppliers will have a box of spares... sometimes.

 

[MRT]

Look on eBay....

It's where a lot are sold from, and the suppliers will have a box of spares... sometimes.

I think the importers may have ceased trading, @Housemartin was on here in 2016, 2 messages or so then nothing more. Nina Martin was her name (given in the thread)

 

[steveR]

I think the importers may have ceased trading, @Housemartin was on here in 2016, 2 messages or so then nothing more. Nina Martin was her name (given in the thread)

The various Chinese machine are often clones of each other, so you might find another "brand's" parts will fit.

 

[MRT]

The various Chinese machine are often clones of each other, so you might find another "brand's" parts will fit.

So far Celli seems the nearest, if I don't get a dead cert I will risk a couple of them and make them fit

 

[Kidds]

I have a box full of blades somewhere, they will be off a Howard though. Think I have curved and 90°

 

[steveR]

So far Celli seems the nearest, if I don't get a dead cert I will risk a couple of them and make them fit

Tried this outfit?

Rotovator Blades & Tines to suit by Manufacturer - Flails Direct

Flails Direct Rotovator Blades & Tines to suit by manufacturer

www.flailsdirect.co.uk

I have had stuff off them in the past, and found them helpful.

 

[MRT]

Tried this outfit?

Rotovator Blades & Tines to suit by Manufacturer - Flails Direct

Flails Direct Rotovator Blades & Tines to suit by manufacturer

www.flailsdirect.co.uk

I have had stuff off them in the past, and found them helpful.

Oddly enough just heard back from them, sounds like they can find something to fit

 

[MRT]

I have a box full of blades somewhere, they will be off a Howard though. Think I have curved and 90°

When you start looking there seems to be a million different potential variants, I thought being chinese it would be a reverse engineered knock off - sadly it seems to be original thought

 

[Gerbert]

Freesmessen

Freesmessen voor alle bekende merken grondfrezen.

www.prodina.nl

Have a look here, not saying you need to order there but they have a whole lot of blades with the holesizes with it.

 

[steveR]

Oddly enough just heard back from them, sounds like they can find something to fit

Great stuff

 

[steveR]

When you start looking there seems to be a million different potential variants, I thought being chinese it would be a reverse engineered knock off - sadly it seems to be original thought

Bit like Claas bearings and belts on combines (used to be) back then....

 

[MRT]

Bit like Claas bearings and belts on combines (used to be) back then....

Never had the pleasure. It's always a dark day when I'm holding a spanner!