Simba miniflow parts

[rob h]

I've broken 2 of the spring tines on the front and can't find a suply. No problem getting the ones with the counters attached..has anyone found a supply of them or will I have to convert it to something else.any advice welcome

 

[Lincsman]

Agri linc had some last year, the LH ones seem to be out of production, as my normal suppliers didnt get me any from orders placed nearly 2 years ago.

 

[rob h]

I haven’t rung Agri Linc but they aren’t listed on the website. pnb tell me its an obsolete part now Kv own great plains

 

[Will 1594]

Terry birch had a big stillage full of them ,he got a load of stuff out of sleaford when they shut

 

[rob h]

Terry birch had a big stillage full of them ,he got a load of stuff out of sleaford when they shut

thanks I’ll have to give him a call

 

[its.... only me]

Could improvise & use a straight leading tine, ours has three either side behind the tractor wheels, plenty on web with all these only.

 

[rob h]

Looks like it might be the only option.to use rigid tines
How do you stop them swinging forwards into the tractor tyres

 

[rob h]

Thanks for all the replys I'm now sorted it's going to be straight tines.after seeing the comments on hear it got me thinking my cousin converted a free flow to direct drill I rang him this morning and he has a pile he wants rid of

 

[rob h]

Ok new problem been and collected them and They dont fit.the holes on the drill are too close to the frame so it looks like i either cut 5mm of the back of the tines/drill new holes in the frame but i dont think i can get a drill in or slot the holes.

 

[its.... only me]

This is what we have. It was like it when we bought it.

 

[Lincsman]

Cut the 5mm off, there is plenty of metal to them anyway.

 

[rob h]

I wonder if you're tines are shallower I can't get the pin in as the tine won't go back far enough.unless you're brackets are slightly deeper.i can see why they've welded the flat bar on to move the shear bolt lower it will make it less likely to shear

 

[rob h]

getting the hang of this now it's the fith one the tine won't fit without a bit taking of the back. If I snap one of them I'll be worried