Slurry pipe

[jack6480]

Hi,
I'm looking to get some umbilical slurry pipes, currently running oroflex 20 (yellow stuff). I'm after a length of 5 inch to come straight off the pump so doesn't need to be top of the range stuff but something pretty good.
Iv been offered some rubber hose and some PU green pipe I have been told the chap who used to make snaptite makes the green stuff.

I'm after some 4 inch drag hose as well.
Priced up some of that PU green stuff again and been told that it's good for dragging.

Someone's recommended I get some pu2000 which is more money but will last a lot longer dragging

Any help would be appreciated
Many thanks


TIA

 

[MickMoor]

My layflat here, has low tensile strength, so no use for dragging: http://mickmoor.co.uk/equipment-and...t-for-sale/46-pvc-lay-flat-hose-special-offer

and suction hose here: http://mickmoor.co.uk/equipment-and-spare-parts-for-sale/5-slurry-equipment-for-sale/21-slurry-hose
PM if any use, I can't be far away.

 

[Will 1594]

@Speedstar

 

[Speedstar]

Get yourself some snap-tite made by the America hose company, Have some 5" second hand pipe for sale if you want some cheap pipe.

 

[mtx.jag]

@saly123

 

[jack6480]

Get yourself some snap-tite made by the America hose company, Have some 5" second hand pipe for sale if you want some cheap pipe.

What condition, is that polyurethane? How much have you got and what price
Thankyou

 

[jack6480]

Get yourself some snap-tite made by the America hose company, Have some 5" second hand pipe for sale if you want some cheap pipe.

Is there different types of snaptite I should look at?

 

[Speedstar]

If it had a few couplings or joiners in it there will be about 200 meters,had bauer couplings in it but sold them to a guy a while ago & have never used it since as I do not like pipe in 50 meter lenght's or so, You can have it for £500 + Vat with any 5" couplings we have lying about.
Yes there are a few types of Snap-tite, depends what you want to do with it & how much you want to spend

 

[jack6480]

Just looking for 5 inch travel pipe and 4 inch drag Hose

 

[Blue.]

Bought some 4" snaptite last spring,it seems to be ribbed and twists easy. might just be newness,trouble is I avoid using it.

My 4" G&H pipe has been good but its worn out now,always rated my 6" Angus hose but feck 6" is numb stuff.

 

[Richard.lee]

If it had a few couplings or joiners in it there will be about 200 meters,had bauer couplings in it but sold them to a guy a while ago & have never used it since as I do not like pipe in 50 meter lenght's or so, You can have it for £500 + Vat with any 5" couplings we have lying about.
Yes there are a few types of Snap-tite, depends what you want to do with it & how much you want to spend

We produce the Shug Fit Coupling for the USA market.
The price is much better
it is compatible with the cadman etc.
As to the drag hose ,can you accept to us the TPU?
Inner tube and cover: Smooth PU cover and tube.
Reinforcement: Circular woven polyester jacket Operating
Temperature Range: From -60° F to 176° F (-50° C to 80° C)
Standard Color: Red, Olive green, other colors available per request
Standard Length: 660ft/200m; 990ft/300m, 1320ft/400m, other lengths available per request;
Couplings: shug grip fittings/Bauer Coupling/ Storz etc.
Warranty: 5 years guarantee

 

[Speedstar]

We produce the Shug Fit Coupling for the USA market.
The price is much better
it is compatible with the cadman etc.
As to the drag hose ,can you accept to us the TPU?
Inner tube and cover: Smooth PU cover and tube.
Reinforcement: Circular woven polyester jacket Operating
Temperature Range: From -60° F to 176° F (-50° C to 80° C)
Standard Color: Red, Olive green, other colors available per request
Standard Length: 660ft/200m; 990ft/300m, 1320ft/400m, other lengths available per request;
Couplings: shug grip fittings/Bauer Coupling/ Storz etc.
Warranty: 5 years guarantee

Who are you then ?

 

[Richard.lee]

Who are you then ?

I am Richard of Zhejiang Waysing Metal Products Co.,Ltd. We special in produce different kinds of fittings such as camlock coupling, bauer coupling.
And Drag hose fittings (Shug grip fittings) ,we just developed 3 month ago.
We also have a partner who make the TPU hose for USA market as drag hose for manure transport.

 

[Eminus]

just had a price on oroflex20 5" pipe and its £15+vat a meter, was told that it needs to be that grade or similar as since we have a Doda HD35 and the pressure it produces would be liable to burst a lower graded pipe. Is this true? Our system only has one 200mtr 5" lenght of the pump just now and the rest is 4" so looking to increase the 5".

 

[jack6480]

just had a price on oroflex20 5" pipe and its £15+vat a meter, was told that it needs to be that grade or similar as since we have a Doda HD35 and the pressure it produces would be liable to burst a lower graded pipe. Is this true? Our system only has one 200mtr 5" lenght of the pump just now and the rest is 4" so looking to increase the 5".

I thought oroflex 20 was the lowest grade you could get

 

[Speedstar]

just had a price on oroflex20 5" pipe and its £15+vat a meter, was told that it needs to be that grade or similar as since we have a Doda HD35 and the pressure it produces would be liable to burst a lower graded pipe. Is this true? Our system only has one 200mtr 5" lenght of the pump just now and the rest is 4" so looking to increase the 5".

If I was you I would buy some snap tite hose

 

[Speedstar]

Shop about for hose , was talking with guy today that was pricing G & H hose & there was £7 difference in price per meter .some people like a good profit if they can get it

 

[Geoffrey Wox]

If anyone would like to contact us we have a large selection of new and used hose in 5"and 6" with various coupling options,specifications can be supplied and supported in full.

 

[RAF]

@jack6480 , get your 6 inch

 

[Eminus]

Just wondered as we are from slurry experts and seek some advice, just extended our 5" hose off the doda to 1000mtr then 4" for 400mtr as drag hose. (Previously had 200mtr 5" and then all 4". )
We had to run the pump at Pto speed. 1000rpm to get enough pressure to spread through a single nozzle splash plate, now with more 5" we only run the pump at 450rpm and that's enough, is the extra 5" hose that much easier on the pump?