steering wheel controller for Greenstar

[Neddy flanders]

so have a greenstar ready tractor and autotrac combine. to switch greenstar onto tractor and make it self steer I need a steering wheel controller? correct? any advice or suggestions?

 

[Brisel]

There's a difference between Greenstar ready and Autotrac ready. I think Greenstar ready means the wiring looms are in place on the cab pillars & roof. Autotrac ready means the steering valves are in place as well.

 

[Neddy flanders]

agreed. tractor is not autotrac ready but is greenstar ready.
any opinons on different retrofit steering controllers?

 

[7800]

theres a new model jd atu (electric steering wheel) cost 1200 ish , and can use same screen as the combine
Has the tractor got activation ?

 

[Lukehaynes]

Just upgraded the atu on our Bateman from the John Deere atu 200 to the new atu 300, it’s a massive leap forward. Much less noisy, quicker to pick up lines, less movement left and right and also it has a calibration mode as apprised to fiddling with settings as you go on the atu 200. It’s pretty close to an integrated system.

As you would be using it on JD machines it would be much quicker to swap over between machines.

 

[Cambs Farmer]

@Neddy flanders we have got a atu 200 and the bits to go with it only used once, also a 2600 screen if any good?