Subsoiler/Ripper/Flatliner

[John Deere 8530]

I would like a Subsoiler/Ripper/Flatliner something similar to/ or a Simba Flatliner 500. It needs to have DD rings/Razor Rings or something similar. It needs to be very strong and be able to go 18inches deep, it will be pulled behind a 365hp wheeled tractor. Preferably with 5 legs and getting on for 4m wide. Preferably shearbolts rather than hydraulic reset. Preferably mounted but would consider trailed. Around Lincolnshire area as well preferably but may travel. Good metal preferred.

 

[Nick Adams]

3M Shakearator?

 

[chickens and wheat]

We have old cousins level lift converted to a subsoiler , currently with 3 legs that take a large sumo point, 4m wide so plenty of room to add more legs, I got the legs from challenger agri 3 years ago.

A lot like this but no steel wheels and heavier frame, not painted like that either.

dont know its value but its for sale

http://farmkit.com/show/17687/cousins-level-lift

 

[spikeislander]

@robertk

 

[John Deere 8530]

3M Shakearator?

No thanks not what I'm looking for but thanks anyway

 

[chickens and wheat]

 

[John Deere 8530]

Thanks, but no thanks as it has got to have dd rings or something similar.

 

[spikeislander]

Andrew and Robertk had a twb on classified recently looked just the job. Have a search I'm sure you will find it

 

[spikeislander]

Found it posted above

 

[Stephen E]

I spoke to Tim Howard last week and he is demoing a 3.5 metre mounted subsoiler. Well worth a look. We have a 5 metre one and can't speak highly enough of it.
www.soilmasters.co.uk

 

[Robert K]

I have a TWB subsoiler here for sale @JohnDeere8530

 

[Will 1594]

I have a TWB subsoiler here for sale @JohnDeere8530

Well that is the machine for him he said he wanted strength. If your going 18 inch ask terry to cut you out some 12 mm shear tabs instead of 10 mill ones as you will stretch others. But personally if you have compaction down there would go at 12 inch and then again to get some air in it and let it breathe then deeper as it has some where to move

 

[Badshot]

I have a TWB subsoiler here for sale @JohnDeere8530

That's the wrong John Deere 8530 i think.

 

[AgriLinc]

We have a couple of options currently in our yard here in South Lincs which may suit your requirements?

http://www.agri-linc.com/shop/products/id/mu102913.htm

http://www.agri-linc.com/shop/products/id/mu102659.htm

 

[John Deere 8530]

I have a TWB subsoiler here for sale @JohnDeere8530

Thanks but it's not not wide enough and it's got to have dd rings or something similar, thanks anyway

 

[John Deere 8530]

We have a couple of options currently in our yard here in South Lincs which may suit your requirements?

http://www.agri-linc.com/shop/products/id/mu102913.htm

http://www.agri-linc.com/shop/products/id/mu102659.htm

Thanks for your help but they're not wide enough as it has got to cover a John Deere 8530 with duals on, thanks anyway

 

[John Deere 8530]

Well that is the machine for him he said he wanted strength. If your going 18 inch ask terry to cut you out some 12 mm shear tabs instead of 10 mill ones as you will stretch others. But personally if you have compaction down there would go at 12 inch and then again to get some air in it and let it breathe then deeper as it has some where to move

Yeah I think those TWBs are good but that one has a packer roller and not wide enough, I usually try to rip on ploughing as then 9 inchs is basically done.

 

[Will 1594]

How wide are you with duals as atkinsons have a used terminator. 3.5 m. It is well priced you could run 5/7 legs in it they make a good job on top of ploughing on heavy

 

[John Deere 8530]

How wide are you with duals as atkinsons have a used terminator. 3.5 m. It is well priced you could run 5/7 legs in it they make a good job on top of ploughing on heavy

4.2m with duals on, so it wouldn't be wide enough, but thank you

 

[Weare Cham]

Why are duals required for cultivation on a tractor of nearly 400HP

What do you think duals are for?