Sumo seeder

[Luke CFL]

I have a sumo seeder run by radar and Ed’s control box, calibrates up fine used for grass seed ok yesterday trying to put a small seed mix in today and it’s not sitting on any where near enough seed.
You use the pine button and seed is coming out fine

Any ideas on what to check

 

[KB6930]

Which sumo seeder the old type with the roller with 6 outlets or the new type with the separate distribution head ?

 

[Luke CFL]

Which sumo seeder the old type with the roller with 6 outlets or the new type with the separate distribution head ?

Old type

 

[KB6930]

Old type

Did you put enough small segments in the seed roller ?

 

[Luke CFL]

Did you put enough small segments in the seed roller ?

With 2 in each section minimum forward speed was 20kph dropped to 1 in each and it was 8kph calibrated fine but under applying

 

[KB6930]

By how much ?

Mines usually off a bit but nothing drastic

 

[Luke CFL]

By how much ?

Mines usually off a bit but nothing drastic

Usually a bit out but it turns out I have been a bit dull and calibrated it for seeds m2 so problem solved this morning