Terex…Matbro loader

[Old Tup]

Can anyone tell me what the max width is?

 

[bravheart]

Can anyone tell me what the max width is?

You need to tell us what machine first

 

[Old Tup]

The Artic Terex version of a 250
Problem…..it’s a bit involved….have a small job to do …needs something with that lifting capacity and reach but narrow enough to get through a 2.45mtr ish gap
Going to be a cadging job….and trying to figure out what to try and cadge…
310s would only have 3cms spare
Thought I could narrow the search down a bit.

 

[slackjawedyokel]

Matbro TR250:
View attachment IMG_8165.heic
Terex T250:
View attachment IMG_8166.heic

 

[Old Tup]

Matbro TR250:
View attachment 1146300
Terex T250:
View attachment 1146299

iPad doesn’t like the format…

 

[Old Tup]

Best guess I can find is 2.2mtrs…

 

[slackjawedyokel]

Best guess I can find is 2.2mtrs…

2210 Matbro or Terex 250.

 

[slackjawedyokel]

 

[ACEngineering]

Best guess I can find is 2.2mtrs…

it may depend what tyres are on it, matbro standard was 15.5x80 mostly but some later ones and the terex all had 17.5 and i have seen some people put 19.5 on but they rub on wheel arch.

 

[Old Tup]

The early Terex‘s will simply be a Matbro painted White….same axles…so same width..
but 2.2 mtrs seems to be the figure….
Any way 2.2 goes into 2.45 much easier than 2.4

 

[Old Tup]

it may depend what tyres are on it, matbro standard was 15.5x80 mostly but some later ones and the terex all had 17.5 and i have seen some people put 19.5 on but they rub on wheel arch.

Nothings simple is it….
17.5’s should still squeeze through 2.45 though…