TFR cleaner

[Robert K]

View attachment 806704 I got a small bottle with my 205 litres about 18 years ago that plugs into pressure washer.it holds about a litre with the foaming brass jet on the top.unfortuantly the snowstorm is so corrosive it eats the brass fittings so I get 9/12 months out of a bottle and then replace it.ive had several over the years.still got about 30 litres in my barrel too.i don’t use a lot but it goes a long way.by far the best stuff I ever used and like covering a machine in shaving foam.just mustn’t let it dry.
Nick...

Would this setup work on a Nixon pressure washer

 

[nick...]

Yes it would.you just need the correct fittings which can be bought on amazone or eBay.the bottles are all the same.ive got a nilfisk and buy the cheapest I can get and swap the fittings around.
Nick...

 

[Robt]

Surely if it’s that corrosive it eats the brass nozzle....... are there not any natural products? I remember borrowing some orange citrus cleaner off my cleaner at the time. We sprayed it on neat to the ex jockey club. Tractors to remove the orange sand stains! @Partstech , it came from Simon and his crew I think! Worked a treat

 

[Robert K]

Yes it would.you just need the correct fittings which can be bought on amazone or eBay.the bottles are all the same.ive got a nilfisk and buy the cheapest I can get and swap the fittings around.
Nick...

Thank you Nick

 

[ACEngineering]

View attachment 806704 I got a small bottle with my 205 litres about 18 years ago that plugs into pressure washer.it holds about a litre with the foaming brass jet on the top.unfortuantly the snowstorm is so corrosive it eats the brass fittings so I get 9/12 months out of a bottle and then replace it.ive had several over the years.still got about 30 litres in my barrel too.i don’t use a lot but it goes a long way.by far the best stuff I ever used and like covering a machine in shaving foam.just mustn’t let it dry.
Nick...

just taken delivery of another one of them myself. They dont like the steam much

But there cheap and last well enough.
I got quick release fitting on my Nixon lance to can swap to long cranked short straight, twin slight crank, or a long with 110deg crank for getting under stuff or round corners. Wouldn't have it any other way pain the back side not being able to poke it where its needed

 

[ollie989898]

Autobrite make foam guns but there will be a myriad of others. You usually have to tell the company what make and model of pressure washer you have.

Do not buy karchers own foam gun because I have one and its carp.