Sandy
Member
- Location
- Aberdeenshire
The draft lift control is pathetic it pulls well thoughAll your doing is pulling a plough. Can't be much different to any capable tractor
The draft lift control is pathetic it pulls well thoughAll your doing is pulling a plough. Can't be much different to any capable tractor
Has to pull well if the draft doesn’t workThe draft lift control is pathetic it pulls well though
Pathetic how ? As in doesn't work or you don't like the controls ?The draft lift control is pathetic it pulls well though
There's a couple of 250's going about here with the good door setup like that oneNot seen one that size without a panoramic door either
Just very slow to come back to height after you dump it down at the end if you know what I mean awesome wheel grip thoughPathetic how ? As in doesn't work or you don't like the controls ?
As it should be...can't stand those full side doorsThere's a couple of 250's going about here with the good door setup like that one
Are they meant to run at 105c when pulling hardThere's a couple of 250's going about here with the good door setup like that one
Yeah they'll run hot my brother in law got 1 in the summer and he was saying that about it .Are they meant to run at 105c when pulling hard
No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anywayYeah they'll run hot my brother in law got 1 in the summer and he was saying that about it .
Funny when we had a 250 in it ran cooler than I was expecting my mate got a 250 after having 2 6215s and he's not getting any bother blocking radiators and overheating on the mowers now on the 250 .
As for the draught I see it's command pro which I don't know about and can't stand but on the normal ones there's a rate of raise as well it's not turned down is it ?
What do you normally drive?No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway
Isn't that what them things on front are forNo it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway
Claas axion 810 picks it up with no front weight and a bag of seed in the hopper no problem, I do use a front hopper for fert but the Jd is no matchWhat do you normally drive?
500kgs over a weighbridge so bugger allThat makes it aheavier tractor then easy to weight things up harder to make them lighter
But the JD has a very short wheelbase for a tractor of that power, I would say if looking at JD the least you would need is a 6230R with the slightly longer wheelbase and heavier lift, but you still would have the very "Agricultural" lift.500kgs over a weighbridge so bugger all
I know they'll do a 4m Kuhn like that but yeah they need a front press/hopper.No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway
most dealers have stock tractors coming all the time think a complete new build is 24 weeksAnyone know what lead times are on new Fendt tractors ?