The Demo Thread

[Sandy]

All your doing is pulling a plough. Can't be much different to any capable tractor

The draft lift control is pathetic it pulls well though

 

[collywol]

The draft lift control is pathetic it pulls well though

Has to pull well if the draft doesn’t work

 

[KB6930]

The draft lift control is pathetic it pulls well though

Pathetic how ? As in doesn't work or you don't like the controls ?

 

[Lofty1984]

Not seen one that size without a panoramic door either

 

[KB6930]

Not seen one that size without a panoramic door either

There's a couple of 250's going about here with the good door setup like that one

 

[Sandy]

Pathetic how ? As in doesn't work or you don't like the controls ?

Just very slow to come back to height after you dump it down at the end if you know what I mean awesome wheel grip though

 

[Deerefarmer]

There's a couple of 250's going about here with the good door setup like that one

As it should be...can't stand those full side doors

 

[Sandy]

There's a couple of 250's going about here with the good door setup like that one

Are they meant to run at 105c when pulling hard

 

[KB6930]

Are they meant to run at 105c when pulling hard

Yeah they'll run hot my brother in law got 1 in the summer and he was saying that about it .

Funny when we had a 250 in it ran cooler than I was expecting my mate got a 250 after having 2 6215s and he's not getting any bother blocking radiators and overheating on the mowers now on the 250 .

As for the draught I see it's command pro which I don't know about and can't stand but on the normal ones there's a rate of raise as well it's not turned down is it ?

 

[Sandy]

Yeah they'll run hot my brother in law got 1 in the summer and he was saying that about it .

Funny when we had a 250 in it ran cooler than I was expecting my mate got a 250 after having 2 6215s and he's not getting any bother blocking radiators and overheating on the mowers now on the 250 .

As for the draught I see it's command pro which I don't know about and can't stand but on the normal ones there's a rate of raise as well it's not turned down is it ?

No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway

 

[Hobbit]

No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway

What do you normally drive?

 

[Fendt516profi]

No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway

Isn't that what them things on front are for

 

[Sandy]

What do you normally drive?

Claas axion 810 picks it up with no front weight and a bag of seed in the hopper no problem, I do use a front hopper for fert but the Jd is no match

 

[Fendt516profi]

That makes it aheavier tractor then easy to weight things up harder to make them lighter

 

[Sandy]

That makes it aheavier tractor then easy to weight things up harder to make them lighter

500kgs over a weighbridge so bugger all

 

[Fendt516profi]

Put 500kg on front of jd

 

[gone]

500kgs over a weighbridge so bugger all

But the JD has a very short wheelbase for a tractor of that power, I would say if looking at JD the least you would need is a 6230R with the slightly longer wheelbase and heavier lift, but you still would have the very "Agricultural" lift.

 

[KB6930]

No it was a full speed on the lift. It won’t pick up my drill a 4m folding lemken so it’s no use anyway

I know they'll do a 4m Kuhn like that but yeah they need a front press/hopper.

I noticed the 6250 considerably lighter than the 7930 on the front

 

[Speedstar]

Anyone know what lead times are on new Fendt tractors ?

most dealers have stock tractors coming all the time think a complete new build is 24 weeks

 

[mf7480]

Why does anyone use draft control when ploughing? If there’s a tough bit of ground I want to pull the plough through it, not over it.