Today at work

[Bobthebuilder]

[emoji848] looks like there could be a pic or 2 in the workshop thread soon [emoji849]

 

[JP1]

Got some grass seed on the old fashioned way.

View attachment 834446

First pass. then do it all again another direction.

View attachment 834447

Hope for rain now.

You should have it by now?

 

[bravheart]

Running in furrow. Took a while to get the width set right. Tweeking the front furrow width a bit.
Trying to work out if the 190 pulls it as well as my previous 6080. I think the old one hung on a bit better. Having to run at higher revs at 1850 rpm. Its only done 450 hrs so hopefully it will still be improving.
Only use the big plough in the backend. Have an old 5 fr mounted for winter ploughing.

Hi Kenny, do you pull that plough with the stabilizers slack or tight?

 

[KennyO]

Hi Kenny, do you pull that plough with the stabilizers slack or tight?

I have them locked up tight.

 

[Will 1594]

Running in furrow. Took a while to get the width set right. Tweeking the front furrow width a bit.
Trying to work out if the 190 pulls it as well as my previous 6080. I think the old one hung on a bit better. Having to run at higher revs at 1850 rpm. Its only done 450 hrs so hopefully it will still be improving.
Only use the big plough in the backend. Have an old 5 fr mounted for winter ploughing.

Kenny what plough is it , looking for similar to take the stress of the back of tractor 6 and packomat a big heavy lump,
And in or on land

 

[Hurdle bunter]

Hugely behind on this thread, I’ll catch up when I get chance, one or two from the last couple of weeks

 

[Dman2]

View attachment 834528
[emoji848] looks like there could be a pic or 2 in the workshop thread soon [emoji849]

Is that an Amazone?

 

[KennyO]

Kenny what plough is it , looking for similar to take the stress of the back of tractor 6 and packomat a big heavy lump,
And in or on land

Its a yr 2000 kuhn manager that i got from @Zebbedee . Running it in furrow. It might have enough movement on front furrow to run on land however I have never tried it.

 

[Pan mixer]

You should have it by now?

Still not much,4 mm total so far.

 

[Peter]

Had to reinforce posts for railings

Moving in

 

[KennyO]

Ive always thought getting in furrow ploughing with GPS set up right would be tricky ! Not tried yet ! Been looking at a similar plough but a 7 furrow hoping my t7 230 would pull it !

Had to ditch the press today. 7mm of rain on a mucked stubble was too greasy.

 

[Pan mixer]

Feeding the cull cows in the rain is always pleasant especially since most of them have been put in that group due to temperament problems.

 

[Bobthebuilder]

Is that an Amazone?

yup KE403

 

[Robert K]

Feeding the cull cows in the rain is always pleasant especially since most of them have been put in that group due to temperament problems.

View attachment 834622

Gateway needs a trim out [emoji57]

 

[Agriimark]

Nice weather if your a duck kind of day, workshop jobs and gave the forager a bath after the state it got in yesterday. On this day last year i was pharrowing in some dryer conditions

 

[Pan mixer]

Gateway needs a trim out [emoji57]

Not when you only have the modest size kit that there is around here, anyway it stops caravans getting in (so do the loopy, bad-tempered cows and the 10,000 volts through the fence)

 

[Bobthebuilder]

New bristles in the yard brush kinda day

Old n new

Parked up ready for action

 

[v8willy]

New bristles in the yard brush kinda day
View attachment 834666
View attachment 834667
Old n new
View attachment 834668
View attachment 834669
Parked up ready for action
View attachment 834670

How do the castor wheels preform?

 

[Robert K]

Another Wet day here so been getting our cheffins lots ready and changed the sprayer wheels over

 

[Oscar]

Chap up by us been planting the same barley for over 20 year and get good yeilds

New bristles in the yard brush kinda day
View attachment 834666
View attachment 834667
Old n new
View attachment 834668
View attachment 834669
Parked up ready for action
View attachment 834670

Think you had your money's worth out the old ones !!