Steevo
Member
- Location
- Gloucestershire
My luck ran out quickly.
Thought I would saw up the wood from this morning and ten minutes later the belts break !
View attachment 894351
Maybe it was unlucky concrete!
My luck ran out quickly.
Thought I would saw up the wood from this morning and ten minutes later the belts break !
View attachment 894351
Send it back?Maybe it was unlucky concrete!
Not seen one of them for awhile, did they do a feeder wagon version, or maybe it was just a local company that converted someNew to me little Krone muckspreader collected 55 miles and delivered to my door tonight by Andy Chaplin
View attachment 894197
View attachment 894195
View attachment 894196
View attachment 894198
You are not the first to ask on here. There are several people that do them, I am sure that mine was a Danagri, other types are available including http://augerdolly.com/ just google auger dolly.Where did you get the dolly wheel for the auger from looks like it will save my back
Exhaust fumes?Last of wheat gone. . Suspended blow
Stated to tidy up some old buildings, (first photo is an archive pic)
Sorting the stones out etc ready to try and find some enthusiasm to start rebuilding. Planning on re building the corners and re roof with tin as a storage shed
View attachment 894534
View attachment 894536
View attachment 894535
View attachment 894537
He did not seem bothered ,had extracer fans going ,,i had forky door shut and air con on , ?Exhaust fumes?
You need to keep us up to date with how you get on. Looks interesting!Stated to tidy up some old buildings, (first photo is an archive pic)
Sorting the stones out etc ready to try and find some enthusiasm to start rebuilding. Planning on re building the corners and re roof with tin as a storage shed
If it’s got a pickup hitch just make shore the rear weight hasn’t got lifted up as the rad sits on it. Happened a couple of times to us.4 lots of drizzle so far today so didn't play hay again despite having 50 acres to ted.
mucked out another cattle shed.
View attachment 894572
and stacked some hay properly.
View attachment 894573
and tried to figure out why the engine in thelittle forklift has dropped a bit - thanks @ACEngineering for your advice so far, I think that one of the mounting brackets has bent.
View attachment 894574
4 lots of drizzle so far today so didn't play hay again despite having 50 acres to ted.
mucked out another cattle shed.
View attachment 894572
and stacked some hay properly.
View attachment 894573
and tried to figure out why the engine in thelittle forklift has dropped a bit - thanks @ACEngineering for your advice so far, I think that one of the mounting brackets has bent.
View attachment 894574
One of the bolts in the offside rear bracket has sheared off, having to weld a plate on to that to get another couple of M12 bolts on the side.Brackets are meant to be bent I think?
Look at the rubber mounts. The gap were the metal cup is over the rubber should have even gap all around it. If it's not even the brackets have sagged or bolts come loose/sheared off.