Steevo
Member
- Location
- Gloucestershire
Think the military use Michelin XZ tyres for that size, similar tread though.
.....and likely 10x the price or more that @Boysground paid.
Think the military use Michelin XZ tyres for that size, similar tread though.
You saw these pics in the Southern hemisphere farming thread but for everyone else, this was my day. Woke up to a ferocious stormView attachment 633566
Oasis!
Shot back home today to flick out some more silage and was shocked how it's come away down here.
Good green pick everywhere
Think I will wrap up silage feeding soon and sheet her over, but won't count my chicks, 3 inches of rain has grown 3 inches of grass and that doesn't go far with the stocking rate!
And the Skerne catchment area finishes at the A68
.....and likely 10x the price or more that @Boysground paid.
.....and likely 10x the price or more that @Boysground paid.
@TripleSix have you seen the compressor?Had a couple of days at the airport this week, not much exciting happening though.
Re-fitted the pump on the de-icing rig and all seems well.
View attachment 612310
View attachment 612312
Retrieved a new gritter! The supplier had neglected to fit one the the hub nuts when they build it up[emoji848]. Managed to put the hub cap on though[emoji849], it almost did one full lap of the car park before falling off[emoji23].
View attachment 612314
Bit of a straightening job on the new ranger, someone let the door go in the wind which bent the check strap which then got hooked on the runner for the window and bent that to so the window keeps falling out. [emoji30]
View attachment 612316
Few other bits as well, the other de-icing rig decided to star drinking the oil from the pup (must be feeling left out!) so new diaphragms ordered for next week.
View attachment 612318
Ps. if anyone is looking for a big compressor (70cfm) I’ve got one listed in the classifieds. Thanks. [emoji106]
@TripleSix have you seen the compressor?
Why are the panels going to be off the floorGot involved in fabricating some posts to mount concrete panels on in a shed that will have a drying floor fitted, posts to provide a 1m wide plenum.
Built to the customers design.
I would've done it slightly differently, but it should work ok.
Had the 350a MIG turned most of the way up...
View attachment 634146 View attachment 634148 View attachment 634150 View attachment 634154 View attachment 634156
Ended up plasma cutting a new lid for the carcase incinerator because the old one was so rotten that the chimney had fallen off...
View attachment 634162 View attachment 634164 View attachment 634164 View attachment 634166
Drying floor to be fittedWhy are the panels going to be off the floor
Drying floor to be fitted
PffftCultivated some of the ex beet land, it was just starting to haze out a little and it started to rain again.View attachment 634240
No it's notBrrrrrrrrr very chilly.... Still it's nice when it's cold
All delivered safe had to count them twiceView attachment 626960View attachment 626962
Photos from my day at work! Thanks v much for your help. That's about half a million cartridges you have on! Or did you loose one or two?!