Valtra M120 seat wire problem. No air and forward/reverse

[davidvaltram120]

Hi

I’m trying to identify cables below a grammar seat in a Valtra m120
Wires coming through floor:
2x yellow
1x blue (live)
1x white

Wires coming down from seat:
1x black
1x red
1x white
1x brown

the seat air adjustment is not working and also the forwarder and reverse are not engaging. Does anyone know the correct way these wires are paired together etc?

thanks

 

[agri knives]

Hi

I’m trying to identify cables below a grammar seat in a Valtra m120
Wires coming through floor:
2x yellow
1x blue (live)
1x white

Wires coming down from seat:
1x black
1x red
1x white
1x brown

the seat air adjustment is not working and also the forwarder and reverse are not engaging. Does anyone know the correct way these wires are paired together etc?

thanks

Those wires are in two sepperate cables , the one with two wires of which one is white is the safety switch, if you just join them the forward reverse will work.

 

[davidvaltram120]

Those wires are in two sepperate cables , the one with two wires of which one is white is the safety switch, if you just join them the forward reverse will work.

So the two wires coming from the floor, connect them together? Blue and white I think they are paired as.
Or join to the 2 other wires coming from the seat?

 

[agri knives]

So the two wires coming from the floor, connect them together? Blue and white I think they are paired as.
Or join to the 2 other wires coming from the seat?

Yes just pull the plug apart and get a small piece of wire , bent it into a U and stick it into the plug coming from the floor , that sorts out the forward reverse.

 

[davidvaltram120]

Yes just pull the plug apart and get a small piece of wire , bent it into a U and stick it into the plug coming from the floor , that sorts out the forward reverse.

Thanks. I’ll try it tomorrow! I presume then just the two yellow wires connect up to the remaining two wires from the seat to activate it again?

 

[Green&Steam]

Yes just pull the plug apart and get a small piece of wire , bent it into a U and stick it into the plug coming from the floor , that sorts out the forward reverse.

Be warned if it’s like the John Deere six 930 I had every so often you would need to split the wires and reconnect as it says no operator on seat