What version is ez guide 250 running

[bandit]

Hope you are all well. Currently having issues with my system
Slow to find signal and then intermittent (as if going under a tree but In the open)
Is anyone else having issues and is there a fix
Thanks peter

 

[bandit]

Running this currently

 

[Slick]

v.3.12 is the current version

 

[bandit]

Well it's either a fault or setting issue, bloody frustrating though

 

[Sparrow]

All connections good?

 

[Spanner_Man]

Set to advanced set up and make sure satellite PRN 120 AORE is set to off.

 

[bandit]

Are there any specific satellites that should be on
Never worked as well since the 3.12 upgrade was installed

 

[Slick]

123 and 136. 126 is in test mode but is currently active
I think 136 is due to be offline tomorrow, don't know what time or for how long.

 

[Slick]

Are there any specific satellites that should be on
Never worked as well since the 3.12 upgrade was installed

It wouldn't work at all without it.

 

[Spanner_Man]

Make sure 136 and 123 are set to on or heed health. What reciever are you using? The small patch or the ag15?

 

[bandit]

Ag15. I do have a spare so I will try that too

 

[Francisco Carlos Lima]

try to boot the system.

 

[bandit]

Make sure 136 and 123 are set to on or heed health. What reciever are you using? The small patch or the ag15?

Can only seem to get satellite health on prn 1 to prn32 under GPS limits

 

[bandit]

I select WAAS/EGNOS
Then I need to select a satellite, which do I need?
It picks up signal but very slow
Currently on EGNOS 136 and favour accuracy

 

[Spanner_Man]

Set 136 and 123 to on

 

[bandit]

Set 136 and 123 to on

How do I see what satellites it's running on?