s line
Member
- Location
- Gloucestershire uk
Started a new job this week. Luckily i was in the right place at the right time.
Close call, would have been bad if all night.Started a new job this week. Luckily i was in the right place at the right time. View attachment 942169
Oh right, they all come with just one clamp. Only 2 cow's milk was dumped i think !Close call, would have been bad if all night.
Supposed to be two clamps on that hose, check the other end as well.
Close call, would have been bad if all night.
Supposed to be two clamps on that hose, check the other end as well.
That looks like a really bad design!Started a new job this week. Luckily i was in the right place at the right time. View attachment 942169
Wouldnt get such a shoddy job with a vms eh Sidney?That looks like a really bad design!
I hope it would at least alarm if that happened!
Can't think of a connection tank side of the milk pump that isn't solid connection or indeed a flexible pipe that could split tbh.Wouldnt get such a shoddy job with a vms eh Sidney?
Original Lely style filter from 25yrs ago. We changed here to a side discharge filter 20yrs ago when we went with all stainless milk line. Flex line got banned by some provincial authorities. Properly installed that filter and hose is not a problem. Never had one come off like that. Had some farms use them for more than 15yrs. Hose lasted that long as well. Double wall braided reinforced silicone.why is it not a stainless steel pipe with tri clover couplings like above the fitting?
edit i can see why, its the filter housing so you can undo it to change the filter
No alarms for that,so it goes down the drain.That looks like a really bad design!
I hope it would at least alarm if that happened!
Did you see the footbath..................
I did yes,does that not affect cow flow through?No alarms for that,so it goes down the drain.
I have only just started,thers for a few little things to sort out.
Did you see the footbath..................
Early days for me at the moment. Only part time there. It's only a few afternoons a week.I did yes,does that not affect cow flow through?
Where ours came out of they had an automatic footpath. But a little way away from robots
I have only just got my foot in the door and only part time.I did ... and I don’t like those cuts or tiles as they look awfully slippery. Grooves running away from the bot would be better
That looks a crap design. Surely the spigot should be longer and have a flange on the end to stop the pipe and clip coming off.Started a new job this week. Luckily i was in the right place at the right time. View attachment 942169
That looks a crap design. Surely the spigot should be longer and have a flange on the end to stop the pipe and clip coming off.
Looks same as on mine, (only 1clip too) at a rough guess, about 7 million ltrs of milk of gone through it (plus thousands of litres of wash water) and it’s not come off, YETThat looks a crap design. Surely the spigot should be longer and have a flange on the end to stop the pipe and clip coming off.
There is two rolled ridges. Installed properly wont come off.
Should have 2 clips. Someone may have accidentally caught the pipe when they walked passed???But looking at the picture it has come off
Ours been running 11 years & never been off.Looks same as on mine, (only 1clip too) at a rough guess, about 7 million ltrs of milk of gone through it (plus thousands of litres of wash water) and it’s not come off, YET