Search results

  1. E

    MF390 rattles under acceleration

    We have a 1989 MF 390 when you accelerate in either low or high forth gear it develops a bad rattle in the gearbox / back end area, any ideas where to start
  2. E

    Sawdust

    Where could i get a full load of baled sawdust?
  3. E

    Max span

    I can get some 457 x 152 x 52 beans @ 9 meters long , if I was to use these as uprights for straw shed uprights what span could I get away with , will be using galvanized purlin and 0.7 single skin roof sheeting using 150mms concrete panels for the first 2.4 m at the base
  4. E

    baler driver

    anyone needing a baler driver for the harvest very mature 19 year old looking experience with a large contractor in square baling this harvest, has six years experience round baleing, mowing, tedding, raking carting grass etc, well trained at preventative maintenance and fairly able in...
  5. E

    Purlins

    Any 6 meter 7 inch C purlins for sale need around 120
  6. E

    Purlin spacing

    Putting up a new shed, 20 m span 6 m bays 18 degree pitch and using 0.7mm Plastisol sheeting, going with 175x65x1.6mm purlins, what's the max spacing between purlins?
  7. E

    JCB teletruk price

    Anyone got a price for a new JCB teletruk, thinking of buying a 35 model 4x4 rang two dealers on different occasions but never heard back from them I see you can buy direct from JCB on there site but maybe its just for smaller mini diggers / dumpers
  8. E

    Roller shutter tubular motor problem

    Anyone know how a tubular motor is fixed inside the round pipe barrel?
  9. E

    Changing bale chamber size

    Was there a company that could change the bale chamber of a Heston 4900 to a 120,x90
  10. E

    Base plate size

    Started a dig out for a new shed , twin span 104 X 80 x 18 two 52x80 joined side by side ,(copying a neighbor's single span 52x100) was going to use 10x6x31 on staunchions and 10x6x28 on trusses , but because his base plates are buried still unsure what size of base plates & holding down bolts
  11. E

    Brewers grains run off

    Has the run off from brewers grain any actual nutritional value , was thinking of using a slurry separator type machine to raise DM for intake and potentially cut haulage costs
  12. E

    60 x 100 shed steel size

    putting up a machinery house 60 x 100 x 20 foot to the eaves sheltered within a 12 foot bank open at the front for now , may put roller shutter doors on through time , what size of steel without going mental
  13. E

    Independent Animal Nutrionist

    Looking for a nutrionist to help formulating some rations and TMR from locally sourced by product and grains
  14. E

    Mule ewes

    With the breeding sales coming up where would be best place to get 80-90 mules with a bit of blue Leicester in them , not worried about traveling for value
  15. E

    chopped straw

    Thinking of getting a contractor in to chop straw with a roto grind , any idea how much room extra a bale takes up once chopped ? how many hesstons would fit in a 14 tonne silage trailer
  16. E

    Straw storage wanted

    Anyone have a vacant building to rent for short term storage of around 600 six string bales of straw Suffolk / Norfolk / Lincolnshire area
  17. E

    Straw on the ledge

    50 - 100 Acres of straw in the swath wanted for self baling , north of England / Midlands preferred
  18. E

    100 mm concrete blocks

    Anyone priced full loads of 100 mm 7 Newton concrete blocks in Hampshire or Wiltshire lately ?
  19. E

    520-50

    Anyone ever dared trying to buckrake silage with one of these or is the ground clearance just not there ?
  20. E

    Clamping straw with grass

    Would ensiling wheat straw with fresh grass and possibly even chopped Bert have any benefits of digestion or DM
Top