Search results

Is there anything on the market that will monitor fuel used on journeys aswell as routes used/location etc that could be used for quads/pickups/tractors. Any recommendations?

Hi, looking for a new shear grab after our current grab will likely be written off. Current one is only 5ft 6 (0.9m3) and looking to go bigger to reduce time feeding if possible. Looking at an albutt which probably speaks for itself but also looking at a quicke/ Silocut. Anyone any experience...

Looking for a 10-15m3 mixer, condition more important than make. Ideally with a side elevator for loading sheep trailers.

Any alternative companies other than dealer or Thomas Scott seating? Been waiting a while for shipments to arrive, either COVID or brexit, same old same old. Replacing the whole seat as it is goosed.

Is there a rule of what can be put down the spout for swedes/fodder beet before you’ll run into trouble with seed burn? How much is too much? Placed in a band behind a vaderstad tempo at 450mm spacing. Thanks

Are there any precision drills that can go as narrow as 375mm or as wide as 750mm? Crop is grazed in situ or lifted with a beet bucket so doesn’t need to fit for a lifter. Thanks

Can anyone tell me is there a proper way to prepare fibreglass to sort a cracked rear wing. Couple stress fractures have been sorted and held fine but there’s a large crack (3-4”) which hasn’t held and the repair basically fell off.

Anyone know how to turn off or cure the auto lock on a 2010 Ford ranger. After 30 seconds it locks itself with the keys in the ignition but not turned on. If you open the door and then shut it, it doesn’t seem to.

Just wondering if anyone could help. Looking at new fertiliser spreaders and currently have a Afs 700 screen in a maxxum 145 with isobus. Have never used it for isobus but considering getting a spreader without a box and using it through the screen. Is anyone using a Kuhn 40.2 through the same...

Looking for suggestions on feed out areas in the winter time. Previously cattle are out wintered until calving and brought in late feb/early March or by scan date. Usually start on straw anytime Now and then switch to silage/hay depending on condition etc nov/dec. Usually add in some...

Has anyone made there own silage sides before? Needing some inspiration with some pictures

Just a little information, at the minute all spraying is done by contractors but going to take it back in hand and do it ourselves. Not looking to spend too much but liquid fertiliser is a possibility and have several possibilities to look at. At the minute we’re on 24m but ideally would like...

Hi, Before we contact our provider. We’re currently looking to move house and about to put ours on the market. We live in the farmhouse and the supply comes into one of the sheds near to our house that isn’t in our title deeds. The house supply is on the same rate as the farm and is paid by my...

Can anyone recommend a face mask/respirator for working in very dusty/hot environments which won’t mist up as Fed up of the goggles misting up all the time. An assisted air respirator type machine has been used but still suffers from the same problems.

Can’t be the only one looking forward to pre lambing feeding requirements, especially with availability and pricing of proteins etc. Brief background is we lamb inside from last week in March. Ewes will be on stubble turnips up until 2 weeks pre-housing. Have been supplementing twins with a...

It’s that time of year again,Who’s had prices for crystalyx/equivalents then? Been quoted £970/t and going up another £30/Ton for October followed by another £30/t after that. Although they’re handy will look for alternatives

Looking at various mix of lambs creep and although would be easy to buy a pellet/nut in we have a big heap of barley/oats/beet pulp/dark grains and soya leftover from feeding ewes. Sure I’ve read on here of some feeding barley/oats/soya. What’s everyone using?

Hoping I could get some advise. We have a wood pellet boiler which has been in for the past 3 years from a reputable manufacturer. It’s given good service on the whole apart from the back end of last year. From the beginning of November it was constantly throwing up error codes and going into...

Looking for a simple bale unroller/unwinder. Either 3 point linkage mounted or JCB q fit.

Fertiliser spreader / broadcaster: Kverneland - Exacta TL Category: Fertiliser spreader / broadcaster Manufacturer: Kverneland Price: £4000 Condition: Used Description: Kverneland exacta TL fertiliser spinner Images: See the full size images for this listing on the classifieds by...