As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
Hello everyone!
I want connect AgStar GPS to CCI1200 terminal but I can't find the required cable anywhere. GPS have a 14 pin AmpSeal type connecting and terminal have a 12 pin Deutsch type connecting. Where can i find the required cable or I can do it myself ?
Thank you
Greetings from Estonia!
Just started using a new to me x30 in a bateman. It keeps getting confused and thinks I'm going backwards instead of forwards. Recalibrating the compass fixes it but its a pain, any suggestions.
I have seized the belt driven air compressor on our 52plate Househam and am stuck for parts as they are no longer listed in Househam's stores . Any ideas on alternative suppliers , please ? Not checking oil level = one useless sprayer with plenty of work waiting !!
As above. Are they any good? Been to see one today and the hydro handle seemed quite stiff? Is this normal or will it just need a new cable!? Is there any major issues to look out for? Thanks
Has anybody setup hydraulic autosteer on a Househam AR3500 2015 sprayer? I would like to know what valve should be used to suit the Househam hydraulic system.
I'm using a Topcon x25 display with a Agi4 receiver.
Cheers
I am setting up a Househam AR3500 with a Topcon X25 with hydraulic autosteer and using the GPS out for the Feildmaster ASC.
My issue is the GPS out signal is altered with the Topcon vehicle and implement geometry therefore once the fieldmaster adds it's geometry it's a full machine length out...
Thinking about a new sprayer, probably SP. PWM (Capstan system) seems like a no brainer to me, individual nozzle control, turn compensation, no need for lots of air pipes along booms. Seems like you cant lose ;)
So any negatives? We are running a trailed just now with auto section control (8...
I have a RG 418 Sprayer that currently sits on 700/50/26.5 tyres. I find they sit on top well but if I come across a wet spot they don’t have the traction to drag me through and instead have a habit of spinning on the top and making a mess. What would be the best tyre/rim to fit that will give...
we are looking for a low ground pressure sprayer we were looking at something like an agribuggy am I just asking for trouble buying an old machine like this
So thinking of upgrading the sprayer currently using an Amazone uf 1201 with a ft1001 front tank, I would like to increase capacity but the question is do I go for a uf 1602 or 2002 rear sprayer and possibly upgrade the tractor in a few yrs time MF 6470 or do I bite the bullet and go for a...
With autumn drilling 2020 bearing an alarming resemblance to drilling 2019 so far, have you got your work lights in gear for some late night work? Our range of plug & play LED lights will keep your eyes fresh to get #autumndrilling done - so long as the rain stops 🌧
Find out more here.
We've got an arag 400 s and a novatel receiver in a Househam spirit and twice now the Househam tech guy has tried to put it onto SBAS correction and it just beeps and put a warning up saying insufficient GPS signal this can be fine for a while then start it in the middle of a 50 acre field so...
Going on to liquid fert and had more or less decided to go down the hardi quintastream or hypro esi nozzle. I then thought about if the six rear nozzles hit the frame/mudguards with the patteren.? Do they make a circular pattern or flat like a standard nozzle.? Is this a common problem.? Its...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.