I'm looking into getting a weigh system on my Manitou.
Does anyone have them on their telehandler? good, bad, any better or worse than others? Main use will be for feeding cattle with a mixer bucket and weighing grain.
Not a big user, only ordered 8x600kg bags of 20.10.10, delivered12th April and kept in shed till today, first 2 bags had set almost solid all the way through not rock hard and managed to break it up enough to get it out of the bag with a piece of 3x3 wood but took about 20 mins.
Next 2 bags...
Hi all,
I am new to the forum and thank you for any replies. I have had a search on the forum but can't find anything that may help.
I have a Merlo p40.17. In the last week the merlo has acquired an intermediate reverse fault. When the reverse is engaged with the shuttle there is no alarm...
Thinking of replacing old Volvo shovel and Merlo loader with something like 320 jcb, Manitou 533 or similar, some have limited slip diff, some self- locking and Wiedermann ( possibly JCB?) have proper diff lock, how do people get on with either? I have had a Kramer 55kl on demo, a little sticky...
Buying a new jcb, went to see it today and they all come on flat face but dealer changes them on pdi most of them time for the usual agri ones (whatever they are called)
Would you keep flat Face or not? Dealer has stacks and stacks of spare flat face fittings from doing pdi's so will give me...
Anyone know of any easy fix problems with the shuttle switch on said joystick. Wont go forward or backwards, then sometimes after switching on and off a few times it does work for a few minutes then stops again. Have had joystick apart and checked the wires. Will have to ring dealer but im...
What are these like? It’s a 2020 with 3000 hours, dual tech gearbox. Thinking of swapping my 541-70 which has been reliable in its 7500 hours and 14 years with me. Thinking of freshening up as we’ve got some harder work moving rubble on an ongoing basis as well as normal farm stuff.
Too many deer in East Anglia justifies re-introduction of lynx and wolves ..........
BBC report on floods on Somerset Levels that may make farming impossible amplified by Goldsmith to become as iconic as the Camargue in France :
Wolves thriving across Western Europe, time to bring them...
I think my merlo has a fault in its dashboard. Which results in the dashboard not powering up, and no drive.
Its made by Continental Automotive. Is it likely to be made solely for Merlo, or is there a chance it's the same as another machine, perhaps with a lower spare part price...?
Hi I am looking at doing a wheel conversion on my Merlo P25.6 (2015) to take pneumatics off and upgrade to aperture tyres the current 12x16.5 tyres do a job but as I do a lot of hard work on concrete rough floors the current tyres don't stand up to it , I can swap to 33x12-20 semi solid...
Written by CPM Magazine from CPM Magazine
Download PDF
One way to brighten up the dreary month of January, as it turns out, is to be surrounded by endless amounts of shiny new machinery, something LAMMA 24 had in abundance. CPM reports on some of the latest launches and UK debuts from the...
Dear friends,first of all hello to everyone.
I'm new on forum because of a big trouble:)
I have merlo 40.25 with error codes
252
255
257.
Service manual is attached
252 GEN - PLD Test
255 GEN - Short circuit on analogic output to servocontrols
257 Plugin – Servo- valve 2 beyond zero during...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.