As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
Direct drilling on heavy clay soils is tricky. There is a lot of great advice out there, but from those on many different soil types. As direct drilling hinges on soil I thought it would be useful to have a thread based on heavy-ish clay soils alone.
just to kick it of; we have a Weaving GD...
Hi there,
I run a 3m kuhn / accord power harrow drill combination. I have been considering using different wheel equipment (18.4 x 38 standard) for when I am drilling but cannot really justify the cost, duals will not fit in the width. I use the same tractor for ploughing and drilling...
Due to the changes in capital allowances it’s brought forward a few machinerychanges for us that would of occurred over the next 2-3 years. So we’re looking at trading a drill, a couple of trailers, a mower and a subsoiler. We’ve done our homework on values for private sales so know roughly...
any manufacturers make any smaller one pass cultivators similar to the sumo trio that can be handled with smaller Hp tractors was thinking along the lines of a 2metre trio type machine, must be a market for such a thing
As a number of you have seen i thought i would post some pics of my direct tine drill build.
Firstly some reasons behind it,
1. I wanted to have a go at direct drilling, having done some scratch till for the last 15yrs our soils are so much better than trying to plough then ph 2 or 3 time. So...
Morning all; just bought a Horsch Sprinter with the 2 guide wheels up front; instruction manual seems a bit useless-at the ends do you lift the tractor arms up and then drop again in operation and when drilling do you set the arms at a height so the guide wheels have a little weight or put them...
Teagle Tulip Vario 3m
Advert added by: Daniel Baron @woodylane
Machinery Details
Category: Tillage Cultivators Price: £8000 Condition: Good
Description
2014 Tulip Vario
2 rows of discs with 6 hydraulically operated subsoiler legs in between.
Large diameter...
I have a Ferguson Single Furrow Plough that needs a new moldboard and the Cat1 pins are badly corroded.
Is it possible to get new pins welded on or is the cost of new moldboard plus repair to pins more than the plough is worth ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.