vicon

Looking for a budget round baler only gonna make 250/300 bales a year, contracter would be the cheapest, but I like machinery and suffering 😂. Any recommendations? Will be used for silage

Has anyone else noticed a plastic burning/melting smell from the plastic covers just below the exhaust, I’m guessing all the ad blue re gen is under there. the plastic on the outside is getting very very hot🤦‍♂️🔥🔥

As above must be very tidy and low usage. Pls PM what you have.

https://www.fginsight.com/news/farming-chiefs-left-flabbergasted-by-eustice-comments-126597 Industry leaders were left ‘flabbergasted’ after Defra secretary George Eustice claimed farmers would generally be able to recoup increased input costs through the increased prices they were seeing in...

How do you calculate the rate of prduct needed per hectare if you wanted 75kg/H of N ? if using a 34.5 % product

Getting to the stage of getting fed up with no quad because it’s away getting fixed 5 fuel pumps in 6 months) currently have a 2018 Yamaha grizzly 700 what would I be best goin to look at? Thinking we don’t need as big a bike (500 would be more than enough) we sow fertiliser with it so need...

Made a start drilling today. Direct into an ex 2 year ley. Reasonably confident that it won't blow.

Do people have any recommendations from a new calving jack. This is what I have the now. Thinking the jacks that are C shaped and go up round onto the pins might be better. Thanks

Hi all New here and was wondering if anyone on here has had any experience with Pronar wrappers. I’m stuck between a Pronar ( which I’ve been told is a McHale copy) or a vicon wrapper which are the same price. I know a lot of people swear by McHale but they’re half as much again and second...

I need to replace a bearing on a Vicon Fanex 553 tedder and just wondered if anyone knew the best way of going about it? The bearing is the one just above the UJ in the picture. It doesn't look like it is possible to remove the UJ yoke from the drive shaft. Is it possible to pull the shaft out...

Any body run one of these mowers ? Good points ,Bad points

One of these please 7.00 12 6 ply (y)

NOW LIVE!! GENUINE REDUCTION SALE OF 2 JOHN DEERE TRACTORS; 2 LAND ROVERS; CLASSIC CAR; SKIDSTEER; TRAILERS; FARM MACHINERY; ATTACHMENTS; LIVESTOCK & GENERAL EQUIPMENT & ORGANIC FODDER BY ONLINE TIMED AUCTION CLOSING ON SUNDAY 13TH FEBRUARY (FROM 7PM) VIEWING DAY: FRIDAY 11TH FEBRUARY (9AM –...

Currently looking to buy a S/H baler for use on straw only. Whilst many would prefer a belt baler for this purpose how are people getting on with roller type machines such as McHale/Welger/Kuhn once the straw becomes brittle. Thoughts and advice appreciated

I have just purchased a property with 15 acres of land and am interested in growing crops (animal farming does not interest me). I know I could hire equipment / get contractors in, but I want to be as independent as possible. What tractor would people suggest I buy? Ideally I would like an...

Had a company here last week who told me I could test 2 products. Anyway. 30 minutes and £250 later having claimed a headland test was the 2nd product therefore only one product was tested I am now after my own kit . Felt slightly ripped off by said company . Where’s the best place to buy a kit...

T6004365 - 2012 Vicon PS04 Wagtail Broadcaster Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Applicators Fertiliser spreader / broadcaster Price: £2100 Condition: Good Description VICON 12M PS04 MOUNTED WAGTAIL SPREADER, 1250 LITRES HOPPER...

Looking for a new 3m trailered mower conditioner. It would be replacing a 20 year old krone, cutting around 200 acres a year. Currently considering either a Claas, krone or Kuhn but would be interested on people’s thoughts on other makes too?

We have a CO 6 Horsch drill. I want to swap the hopper to a smaller unit as it’s only for OSR and we may also be able to mount a fert tank in that space as well. We will probably just fabricate a new tank but thought I would ask here in case some one has an old hopper that’s getting in the way...

Possibly looking at buying a round baler rather than getting contractors in. Would do around 2000-3000 a year mainly silage. Not looking at buying new due to cost but a decent condition second hand one. What seems to be the best balers out there?