1 pass cow cubicle machine

[farmer1989]

Looks good, where you putting the brush, in front of the door?

Between wheels on right side

 

[farmer1989]

 

[farmer1989]

 

[farmer1989]

 

[farmer1989]

 

[farmer1989]

 

[farmer1989]

ok guys what you all think not finished yet got a couple kinks to work out

 

[Philip Watkins]

ok guys what you all think not finished yet got a couple kinks to work out

Some form of mudguard so you're not spraying shît all over the side of the tractor.

 

[Mursal]

Looking good ..............

 

[Horn&corn]

V smart. How does it perform?

 

[JPM]

ok guys what you all think not finished yet got a couple kinks to work out

Looks brilliant [emoji106] well done

I think a bobman is £10k plus so I'd say that unit wouldn't of even cost you. half of that and you can scrape at the same time[emoji108]

 

[Blue.]

ok guys what you all think not finished yet got a couple kinks to work out

Looks good



Shame to ruin a good old multi power on the scraper.

 

[farmer1989]

we

Looks good



Shame to ruin a good old multi power on the scraper.

shes a working girl grandad had her since new does a dirty job but we keep her maintained

 

[farmer1989]

so far not much ag maxi was in shed unused for 3 year tractor battery took off grey fergi we only use her for rolling pit
bit of scrap metal hydraulic brush was salvaged from an old project bit of heavy steel and using mf loader brakets as mount and bought a ram hydraulic switch-over lever removed from our mf 165 then just pipework and twin spool block

 

[farmer1989]

needs a new brush as this 1 has sat for a couple of years and has become flat
tractor might need a new hydraulic pump its a bit slow on the brush but notice it being slow at lifting the arms in general done a lot of work over the years

 

[farmer1989]

biggest problem is we use a chippy sawdust mixed with lime if we fill the ag full it wont agitate so have to fill it half full has any1 put a better motor on 1 or tried something else ?

 

[farmer1989]

Looks brilliant [emoji106] well done

I think a bobman is £10k plus so I'd say that unit wouldn't of even cost you. half of that and you can scrape at the same time[emoji108]

we got quoted £18k i asked if he was taking the pee

 

[JPM]

we got quoted £18k i asked if he was taking the pee

That must be for the heavy duty one with the 'drive into the sawdust pile and scoop up hopper on it' [emoji846]
We've got the small one that u have to fill manually

 

[farmer1989]

That must be for the heavy duty one with the 'drive into the sawdust pile and scoop up hopper on it' [emoji846]
We've got the small one that u have to fill manually

yes the sl with lime dispenser

 

[farmer1989]

V smart. How does it perform?

so far so good needs a bit of tweeking and getting used to it will put a video up soon