135 multipower hydraulic oil filter replacement

[Patrick98]

Just in trying to replace the hydraulic oil filter thinking It would be straight forward but trying to take the PTO plate off it just would not come.

I have attached a pics for reference. She came with a front loader which has a valve seen in the pics. With removing that to get at the filter. I then proceed with removing the 6 bolts and lifting out the plate with PTO in neutral.

however it will not come out. I removed three hex screws also and there is a large bolt just beside the PTO shaft. Would this bolt need to be undone to remove the plate. I haven't got the correct spanner size for it that's why I haven't tried removing it.

A bit of knowledge about this plate would be appreciated as it is different to our Massey 35.

Thanks

 

[trebornella]

Is there a tin plate with 3 bolts underneath the centre housing ?. If so the filter should be accessible from there.

 

[Lincs Lass]

Is there a tin plate with 3 bolts underneath the centre housing ?. If so the filter should be accessible from there.

The filter is behind that plate attached to the pump