Socket drive...,..It’s the knuckle uj but I need
Ahhhhhh, that what it wasI've bought the ujs to weld onto the shafts as replacements. Don't over heat them and make sure they're welded in opposite to the other end or it'll cause the seed wheel to surge rather than turn smoothly.
Weld-on Knuckle for ACCORD metering drive shaft | Agri-Linc
Weld-on Knuckle for ACCORD metering drive shaftwww.agri-linc.com
just found these on Agrilinc .
That will do thanksSealey S12UJ 1/2" Drive Universal Joint UJ for Half Inch Sockets
Sealey S12UJ 1/2" Drive Universal Joint UJ for Half Inch Sockets, Universal Joint for half inch sockets, 312UJ Universal Joint, Buy Online, UKwww.agmpartscomponents.co.uk
That 1 on agrilink is just pressed steel and expensive for 40That will do thanks
AgreedThat 1 on agrilink is just pressed steel and expensive for 40
I knew it was wrong straight away, I could hear the seed pulsing through the mushroom.Ahhhhhh, that what it was
Don't use it anymore, but did replace the uj's on the drive shaft on the old Accord piggyback.
As the crop emerged and the sun hit it right - it left a lovely looking pattern across the field. Pretty pattern all winter until it grew away in the spring