Amazone ZA TS Amatron 4

[Try to succeed]

Hi folks.

I’m looking or some advice on the above. New to me spreader on the tractor for the first time. Does anyone have the geometry figures to input into the implement set up? It is on isobus, with the implement modelling set to mounted. The device geometry is showing 0 values however. Are they even relevant? It’s a step up for me as I’ve used a Kuhn spreader manually before this one.

TIA

 

[KB6930]

On the amatron 4 you need to put in the distance from the receiver yo your rear axle and the axle to the lift arm pins.

 

[KB6930]

It makes a big difference for the auto shut off

 

[Try to succeed]

Thanks KB for the info. Spent a bit of time exploring the settings. A bit more comfortable with it now. Will see how we get on when it’ll travel again

 

[KB6930]

Thanks KB for the info. Spent a bit of time exploring the settings. A bit more comfortable with it now. Will see how we get on when it’ll travel again

I'm having issues with mine this year shutting off too early since I've changed tractor but I'll get it sorted hopefully.

When you put your switch off points into the fert settings putting a - value in that'll make it shut off later