1. A

    Boomless ATV sprayer

    Does anyone use one of these? I see you can get them up to 25’ thought it might be handy for steep/wet/rough bits mostly using mcpa. Just wondered if they worked well or do they not carry enough liquid for that amount of coverage?
  2. C

    Sanderson 725 help

    Hello, I have a new to me Sanderson T2-725 1988 year teleporter and have some questions if anyone can help please? First is the gears, I have an column mounted electric lever, up is forwards, middle is neutral, down is reverse, that's fine. But where does the gear lever with button on top in...
  3. Old Tip

    Wool Press

    Anyone know where I could get a wool press, looked on line and everything is Chinese 🙄
  4. F

    Talk me out of a new Hilux

    So after having looked at a few neglected sh!t heaps and having got 17 years service from a td5 Disco, I’ve priced up a basic new Hilux. After discounts it comes around £21k which I thought was cheap, which if I get 20 years service is even better. Are these trucks the most durable on the...
  5. Tha Ulsterscot

    Disc mowers?

    So having run into trouble in very heavy grass crops today with the old drum mower, I'm starting to think about a new disc mower.(now remember the THINK bit) . What have others bought and what sort of money is involved? needs to be 8 ft. cut and could do without a conditioner.
  6. Agriland RSS

    LEMKEN ploughs gain extra protection

    Written by Justin Roberts LEMKEN has recently launched a new automatic plough protection mechanism which it has called OptiStone. It is available for its Juwel, Diamant and Titan ploughs. The company describes the new development as a “closed system of highly stable leg plates, which is...
  7. TechWise

    Course Threaded Rod for Screw Jacks

    I'm looking for some threaded rods to make bespoke trailer levelling jacks. Something like what's in a G-clamp or those cheap little jacks that come next to the spare wheel in a car. I'd be looking for lengths of about 600mm and a diameter somewhere in the range 16-25mm. I'd prefer stainless...
  8. MickyMook

    Uprights for 60 foot clear span

    I’m hoping some of you can help me out. I’m erecting a 60 foot wide clear span shed, with one side coming down onto a slatted tank wall. When putting in the tank I was told I could use 6x6 columns (I presume quite heavy ones) as uprights, and therefore didn’t need to create piers on the outside...
  9. mixed farm

    New Holland T6

    Anyone driving the new new Holland 6 cylinder T6 160?
  10. J

    new small square balers

    is the new incarnation of welger still manufacturing small balers? what other brands are available and at what price?
  11. J

    Oil drainage rack

    Does anyone have any ideas for a large drip tray, preferably with a method of holding oil jugs, funnels, etc upside down to drain into a small hopper underneath or even via a length of pipe into a 25 lt drum for disposal. I'm fed up of going in our workshop to top up a tractor with oil, only to...
  12. Glass half full

    Loader Mounted Straw Spreader

    Hello All, Does anyone use a loader mounted straw spreader? I currently have a teagle dual chop 7150 I use with Heston bales spreading over ducks, I'm thinking of finding something similar but loader mounted (as I have no other need for a tractor) but im struggling to find anything with a...
  13. kevindb880

    Fiat crawlers, any good?

    Anyone using fiat crawlers? What are they like compared to Track Marshall? Would an 80c lift and pull 4 furrows? Can you still get parts for them?
  14. Headless chicken

    Liquid fert bowser

    Is there any reason we couldn’t secure multiple IBC’s to our bale trailer, plumb together and use these as a bowser? Or any other alternative suitably safe options. Travelling about 4-5 miles
  15. P

    Knight v vicon sprayer

    Hi all after a bit of feedback currently running 07 knight tractor mounted 21 m boss changing to 24 and updating been offered another knight 6 years old and 3 year old vicon similar price obviously know the knight well any advice on vicon ixter b
  16. W

    4 cylinder question.

    Currently running a 160hp 6 cylinder but looking to change it shortly. It’s main jobs are ploughing with a 4 furrow reversible, 3 meter power Harrow, bailing, cutting silage, slurry tanking and silage/grain haulage with 12 ton trailers. Thinking about changing it for a 4 cylinder, the 6130R...
  17. spikeislander

    8m tine seeder, options ?

    Hi there currently running a 8m Vaddy and a 6m ts evo for when wet. With constant bg pressure late drilling looks likely to only become greater and although the vaderstad is awesome and will never leave, I’m thinking an 8m tineseeder would be a good step up? What are my options? The kv is good...
  18. Farm Classifieds


    OTHER MOUNTED SPRAYER 2011 Advert added by: AMTEC Smart Farming Solutions. Machinery Details Category: Other Price: £8950 Condition: U Description 24M booms, good condition, comes with extra front tank How to make contact with the Dealer Click...
  19. F

    Bailer help

    Hello I recently bought a Massey Furguson #12 bailer and having some issues with it. Its my first attempt to mow hay on our farm and have no knowledge with these types of bailers. The problem im having is when I engage the pto the bailer will spin until the pusher comes in contact with a rod and...
  20. S

    Root chopper

    Any tractor mounted pto driven root choppers around. Was looking at one of these... Any good? Plus and minus points please. Whats out there... Thanks.