Big bolt supplier

[Horn&corn]

I need a 1.5 inch by 12” unc or M38 x 280mm bolt ASAP. Shear grab pivot point bolt. Struggling to find an affordable supplier to deliver ASAP. 8.8 or preferably 10.9 with nylock Any suggestions appreciated

 

[Horn&corn]

My feeder chap snapped it this morning and i heard some distance away! Off a strimech grab and not practical to weld. Thanks

 

[Courier]

Length of round bar and weld a big washer or piece of plate on each end -(Nothing is permanent when you have a grinder) until you can source what you are looking for .

 

[Barleycorn]

Partner for Shopfitters and Dryliners

WF Supplies provides a comprehensive range of products to the fit out and drylining sectors, delivered by a dedicated knowledgeable team, who are empowered to care and trained to exceed customer expectations at all times. A third generation family business established in 1972, WF Supplies is...

www.wessexfixings.co.uk

 

[traineefarmer]

Sound like a machine shop job.

 

[ACEngineering]

I need a 1.5 inch by 12” unc or M38 x 280mm bolt ASAP. Shear grab pivot point bolt. Struggling to find an affordable supplier to deliver ASAP. 8.8 or preferably 10.9 with nylock Any suggestions appreciated

I found an excellent place near Birmingham a couple years ago, will try and dig out there name.

For big bolts they stock blanks, you just tell them how long you want it and how much thread and they make it.
I had 2 big buggers for a strimech shear grab and cost peanuts.

 

[quavers]

Ajr fastners , David 07714299150 , try this chap for a price . Got some large bolts from him last year for a plough , he got them cut to the size that i needed . less than a third of the price if i had got them from the dealer .

 

[bobk]

Buy some 38mm bar , 2 holes and a couple of lynch pins

 

[ACEngineering]

My feeder chap snapped it this morning and i heard some distance away! Off a strimech grab and not practical to weld. Thanks

That's funny cause that's what I wanted them for!
The bolts were all bent and ripped a chunk out of the top grab where bolt head sits.

I had some new bronze bushes made to suit a slightly bigger bolt then welded the boss back on and added some straps both sides.

Strimech admitted it was a bad design so that's why I went bigger bolts

 

[Horn&corn]

Buy some 38mm bar , 2 holes and a couple of lynch pins

I think it would snap the lynch pins very regularly. Sheared a bolt this big!

 

[ACEngineering]

I think it would snap the lynch pins very regularly. Sheared a bolt this big!

Here we go.

 

[Mur Huwcun]

Big bolt you say....

 

[ACEngineering]

Big bolt you say....

Gonna ned that 1" drive Milwaukee gun for that one lots of ugga dugas required!

 

[Classichay]

theyre called jackdaw dinstock telford, they can make you any size bolt you need, they have blannks on the shelf and generally only a few hours if theyre quiet.

Dinstock - Your leading Industrial Fasteners Manufacturers

Your leading industrial fasteners manufacturers. Dinstock has emerged as a leader in the fastener trade. Click here for more. information.

dinstock.com

 

[Horn&corn]

Ajr fastners , David 07714299150 , try this chap for a price . Got some large bolts from him last year for a plough , he got them cut to the size that i needed . less than a third of the price if i had got them from the dealer .

Got this sorted over the wkend. £30 inc nut and washer from this chap. £100 From manufacturer.
(hopefully it will fit!)