Can the Rauch Quatron A receive NMEA data

[markota]

Pozdrav svima, nova sam na ovom forumu. Imam Rauch difuzor s Quatron A terminalom. Zanima me može li Rauch Quatron A primati NMEA podatke o brzini traktora. Upravo smo instalirali Singularxyz sagro200 autosteer sustav u naš traktor. Njegova antena ima rs232 kabel za pružanje NMEA podataka. Istraživao sam Quatron utikač koji u sebi ima rs232 vezu. To bi bio kabel koji je jednostavan za proizvodnju i spajanje. Trebaju mi samo neke informacije ako netko zna bilo što o primanju NMEA podataka u quatron, to će mi puno pomoći, ako je tako, koji su NMEA zahtjevi za postavke na mom terminalu

 

[markota]

Hello everyone, I'm new to this forum. I have a Rauch diffuser with a Quatron A terminal. I am wondering if the Rauch Quatron A can receive NMEA data for the speed of the tractor. We have just installed a Singularxyz sagro200 autosteer system in our tractor. Its antenna has an rs232 cable to provide NMEA data. I have been researching the Quatron plug which has an rs232 connection in it. It would make a cable that is easy to manufacture and connect. I just need some information if anyone knows anything about receiving NMEA data into the quatron it will help me a lot, if so what are the NMEA requirements for the settings in my terminal

 

[runkuls]

Hi. You need cable Y adapter - 2055389 (google it).

 

[markota]

The cabal is not the problem. I can easily make a cable or buy a Y cable. But how do I set the NMEA to match the Quatron

 

[Northern farmer]

Once you have the RS232 cable properly wired between the two devices, set the same baud rate for both and configure the necessary messages on the transmitter side. Our Amazone GPS Switch expects GPGGA, GPVTG and GPGSA, the first two at 5 Hz, GPGSA not so frequently. There should be some documentation in the receiving unit manual about the necessary messages.