blue power
Member
- Location
- Staffordshire
ooh, health to wear @blue power .
nice kit there, to start off with......
Its a bad dose hi.....Got a larger impact gun all ready so adding to the collection, but as others have found out there is always something else that you need
Tests on You Tube show Milwaukee not able to get the figures claimed, Snap on actually has the heaviest anvilSee the Dewalt torque figure is 950 nm , both directions ? cany remember the exact Milwaukie figures it is supposed to be higher slackening performance wise it always seems to be a leapfrogging business Milwaukie at the top , makita or hitachi or somebody else about to jump in with bigger better or faster or suchlike.
Aye heard about the anvils snapping having said that wheel nuts that Iv been beat to slacken with the Milwaukee have needed a 3 foot bar basically far too tight anyway . My problem is not comparing like for like going from a Seely to the MilwaukeeTests on You Tube show Milwaukee not able to get the figures claimed, Snap on actually has the heaviest anvil
Did you get any show deals? I take it they were from lammaView attachment 458140got these yesterday
Another problem here in Ireland with the dewalt ,is that they don't sell the impact with the hog ring in the set with the batteries,it comes with the detent pin,to get the hog ring ,you have to buy one as a bare tool,which I did because I had other dewalt tools and have batteries to match.The detent pin doesn't suit for mechanicing.
Did anyone else see the Milwaukee mag drill at Lamma? It looked awesome, but then it ought to be at the special show price of £1000 + VAT!Did you get any show deals? I take it they were from lamma
Yes I've seen that on there website before, the fixed state magnet is a better idea than having elcro magnets imo, just a lot of money as you sayDid anyone else see the Milwaukee mag drill at Lamma? It looked awesome, but then it ought to be at the special show price of £1000 + VAT!
is it just me or is that damn cheap for what it is????Good price for this one.
https://www.powertoolsuk.co.uk/powe...ilwaukee-m18chiwf34-502x-impact-wrenches.html