Hello
I Have a Deutz Fahr TTV 430 brought it new 2012 and it done 1900 hours been serviced regularly and it now doesn't like to go forwards up a slope
if I am driving forwards in either High or low range and start to go up or down a hill or slope tractor sort of sounds like clutch is slipping and then lets go completely and will free wheel. Error code T52 come up on Dash
However tractor will go backwards up and down slopes without problems
We have tried both new sensors in where error code T52 refers to with no difference
Tested the hydraulic pressure at the test port for the Imput clutch pressure about 10 or 12bar so about half where it should be we think at 22 Bar
Tested incoming pressure ok at 22 bar
tested transport clutch pressure no reading 0
Field Clutch pressure ok at 22 bar
Reverse Clutch presure ok at 22 bar
So can't understand why tractor drives ok in reverse but not forward when input clutch pressure low .? As all drive goes through imput clutch?
I would not have thought I would have burnt out Input clutch at less than 2000 hours?
So I am wondering if any one else with a Deutz Fahr vario Transmission has had these problems ? And how you fixed it ?
as don't want to rip tractor in Half think clutch burnt out and to find it ok
Is There any other tests we can do ?
Thank you any Help very much appriecated thanks
I Have a Deutz Fahr TTV 430 brought it new 2012 and it done 1900 hours been serviced regularly and it now doesn't like to go forwards up a slope
if I am driving forwards in either High or low range and start to go up or down a hill or slope tractor sort of sounds like clutch is slipping and then lets go completely and will free wheel. Error code T52 come up on Dash
However tractor will go backwards up and down slopes without problems
We have tried both new sensors in where error code T52 refers to with no difference
Tested the hydraulic pressure at the test port for the Imput clutch pressure about 10 or 12bar so about half where it should be we think at 22 Bar
Tested incoming pressure ok at 22 bar
tested transport clutch pressure no reading 0
Field Clutch pressure ok at 22 bar
Reverse Clutch presure ok at 22 bar
So can't understand why tractor drives ok in reverse but not forward when input clutch pressure low .? As all drive goes through imput clutch?
I would not have thought I would have burnt out Input clutch at less than 2000 hours?
So I am wondering if any one else with a Deutz Fahr vario Transmission has had these problems ? And how you fixed it ?
as don't want to rip tractor in Half think clutch burnt out and to find it ok
Is There any other tests we can do ?
Thank you any Help very much appriecated thanks