- Location
- Darlington
Thanks very much for your help. File downloaded, instructions followed, all working brilliantly now.See post #169 above, or just copy them all to the USB drive. It won't matter.
Thanks very much for your help. File downloaded, instructions followed, all working brilliantly now.See post #169 above, or just copy them all to the USB drive. It won't matter.
No worries. I just joined up the dots. The other lads posted the collateral (files)Thanks very much for your help. File downloaded, instructions followed, all working brilliantly now.
Yes but I was knackered with all them random dots. Thanks to all who helped.No worries. I just joined up the dots. The other lads posted the collateral (files)
Seems like you guys know your stuff, reading the above comments. Therefore I wondered if you could give me some advice please.
We have steering on a CR 9070 combine. Would it be possible to use the receiver and brain to work a steering wheel guidance system on a tractor, if we bought the steering wheel and work screen? Seems a waste paying for a signal that is only used 3 or 4 weeks a year.
Sorry. Its an Intelliview 4 system, but I believe its Trimble based. I know you can take it out and put it on a steering ready NH tractor.These guys may not be able to help you. They know your combine has a steering wheel but they don't even know which auto-steer system is installed on the combine. Perhaps you could help a bit to get them going.
Sorry. Its an Intelliview 4 system, but I believe its Trimble based. I know you can take it out and put it on a steering ready NH tractor.
Happy to help. Glad it all got sortedSORTED ! Many thanks @Pheasant Surprise .
In GPS settings choose future 136 instead of automatic.
You do not have to update the display.
All right.That's what I have done and it still isn't working I go :settings : GPS : GPS setup : WAAS/egnos : satellite : future136 then tick the green tick
All right.
Have you enable it before you set it up instead of automatic?
You have a PM.