Egnos Varioguide, no signal

[bartdereu]

Hi All,

for 2 years i have been working with a Topcon AGI4 reciever in our Fendt. It works with Egnos correction signal (no RTK) and i always had a pretty
good accuracy (20cm) , enough for what i use it for;

Last few days i'm unable to connect to Egnos, Signal is only one red bar and no fix. I called te dealer and i'm going in tomorrow to have
a look but i doubt they will find anything.

I've been reading trough the manual of the varioguide and it seems that the reciever is not faulty, the initial checks are succesfull;

Anyone else have any idea? thanks allot.

 

[Landrover]

Some of Satellites are down until the 16th of this month, I think there's a thread on here about it somewhere

 

[Landrover]

Temporal changes in EGNOS satellites from January to March 2020

For those of you who rely on EGNOS for machinery guidance, you should please take into acount the following information to be able to use EGNOS normally between January and March 2020. Due to maintenance tasks with the EGNOS satellites along the first quarter of 2020: EGNOS satellite PRN 126...

thefarmingforum.co.uk

 

[bartdereu]

Super, thanks allot for this information !!! Saves me lots of headaches ?