Euro3 headstock for Quicke loader?

[Red Fred]

Looking at replacement headstocks for my Quicke 340, I see that there are plenty of the later euro 8s, but not the older euro3s with the straight up-and-down brackets. Does anyone know if they are still made, since all my implements are on the old 3 brackets. Thanks.

 

[Sharpy]

Looking at replacement headstocks for my Quicke 340, I see that there are plenty of the later euro 8s, but not the older euro3s with the straight up-and-down brackets. Does anyone know if they are still made, since all my implements are on the old 3 brackets. Thanks.

Quicke do/did do a headstock that takes both, basically the locking pin position is the same on both brackets but the top bar on the headstock has a recess to suit the older hooks. Will try to nip in and get get a picture of a neighbours.

 

[Will 1594]

Looking at replacement headstocks for my Quicke 340, I see that there are plenty of the later euro 8s, but not the older euro3s with the straight up-and-down brackets. Does anyone know if they are still made, since all my implements are on the old 3 brackets. Thanks.

red fred is your loader same as a 430 if so i have a euro ,no 3 , and trima headstock
loader is been broken up for parts

 

[Tim G]

Quicke do/did do a headstock that takes both, basically the locking pin position is the same on both brackets but the top bar on the headstock has a recess to suit the older hooks. Will try to nip in and get get a picture of a neighbours.

I believe they call it a euro combi headstock, and Google has a few images.

 

[Red Fred]

Thanks folks. I'll have a closer look now it's raining.