Fence wire roller upper

[deere 6600]

Anybody made one any ideas appreciated

 

[Hesstondriver]

Anybody made one any ideas appreciated

To re use or just despose of ?

 

[Agriimark]

hedge cutter work's well

 

[Pan mixer]

There is an attachment for the quickfencer that does this.

 

[deere 6600]

To re use or just despose of ?

Despose of

 

[Hesstondriver]

Despose of

We made something based on an old poly winder . It used an old fence post as a sacrificial core basically wedged on to a hydraulic motor . Needs a restrictor in line . I doubt I’ve photos but could draw it from memory

 

[L P]

On stock net I tend to use telehandler with forks every 6 posts or so and lift/drag it out with posts attached, then roll/tamp it all up into bundles and burn the posts off... really crude, and a shame to waste the wire, but scappy is happy and it's easy to do

 

[2wheels]

a pair of leather gloves and roll it into 4ft rolls, be just as quick and cheaper.

 

[quattro]

Digger keep raking it up and squashing into a heap then put on fire to get rid of posts

 

[Hesstondriver]

 

[Hesstondriver]

Oh the joys
View attachment 1145582

or this

 

[Bobthebuilder]

A rotating bale spike any good

 

[deere 6600]

A rotating bale spike any good

Probably

 

[Tubbylew]

a pair of leather gloves and roll it into 4ft rolls, be just as quick and cheaper.

Its surprising how much you can pull down the old fasioned way when you set your mind to it. Trouble is it's still too slow. All the winders I've seen require the staples taken out, which is probably the most time consuming part of the job, apart from this one.

Simplest way i've done it is with the muck grab, best way I've seen it done is a selector grab on a digger.

 

[Blue.]

Lad I know used the drive off a sr Holland bed chain.

 

[Bald n Grumpy]

Its surprising how much you can pull down the old fasioned way when you set your mind to it. Trouble is it's still too slow. All the winders I've seen require the staples taken out, which is probably the most time consuming part of the job, apart from this one.

Simplest way i've done it is with the muck grab, best way I've seen it done is a selector grab on a digger.

But if you don't take the staples out you can't save them in an old rusty bucket for the future

 

[Tubbylew]

Wanna buy some I'm on my second bucket full now.

 

[tepapa]

View attachment 1145953
Wanna buy some I'm on my second bucket full now.

That's posh, it's even got a lid to keep rain water out to prevent further rusting .

 

[Big_Alan]

Anybody made one any ideas appreciated

You better hurry up. I am only a month away from you.

 

[Wombat]

A rotating bale spike any good

That’s what we use for single strand and barbed wire