Fendt autoguide random fault

[davidcardiff]

Has anyone seen or solved this fault

It’s on a 720s4 rtk unlocked Profi plus
It has had a receiver change from the dealer already
It’s on rangepoint rtx correction
It happens randomly
The fields are wide open no trees
We ran an 818 with a cfx750 and ag25 no problems the last 6 years on rangepoint rtx

 

[Andy12345]

Has anyone seen or solved this fault

It’s on a 720s4 rtk unlocked Profi plus
It has had a receiver change from the dealer already
It’s on rangepoint rtx correction
It happens randomly
The fields are wide open no trees
We ran an 818 with a cfx750 and ag25 no problems the last 6 years on rangepoint rtx

A similar story here ..... just upgraded an old topcon unit to a new Trimble on RP RTX with the addition of Fendts contour assist. Seem to get this message going under trees but it has happended randomly in clear areas of fields. Generally under trees the unit degrades to GNSS or SBAS and the wayline being driven is miles away but comes back on center as soon as the RP RTX signal is green.
I too would like an explanation as to what this error message means in laymans terms.

 

[Riley]

Has anyone seen or solved this fault

It’s on a 720s4 rtk unlocked Profi plus
It has had a receiver change from the dealer already
It’s on rangepoint rtx correction
It happens randomly
The fields are wide open no trees
We ran an 818 with a cfx750 and ag25 no problems the last 6 years on rangepoint rtx

I know it been a while but did you ever get to the bottom of this? I’m getting the same on a new to me 724?