Grease gun thin adaptor for UJs

[crashbox]

Got an awkward grease nipple in a UJ, all the grease gun ends I have are too fat to get on it.

Anyone know where I can get a thin adaptor, to get in there?

It's on a prop shaft under a little telehandler.

TIA

CB

 

[Dry Rot]

I got a right angled nipple adaptor for UJs on the front axle of a MF390 but can't for the life of me remember where I got it from. May not even do your job. But I can tell you, it wasn't cheap. These any good?

Lisle 21600 Right Angle Grease Gun Adapter : Amazon.co.uk: Automotive

Buy Lisle 21600 Right Angle Grease Gun Adapter at Amazon UK. Free delivery on eligible orders.

www.amazon.co.uk

Greasing Hard-To-Reach Fittings | LockNLube

A small number of Milwaukee 18v Grease Guns shipped in 2015 and 2016 with grease hoses that have atypical threads on the working end. Visit our blog to learn more.

locknlube.com

 

[Bobthebuilder]

Grease Gun Adaptor Set - Lube Adaptors For Use with Manual Grease Guns | eBay

Grease gun adaptor set.Quick fit connectors. All fittings complete with locking sleeves.

www.ebay.co.uk

 

[stevedave]

What handler is it. JCB used to make an adaptor to do the UJs on the loadalls.

 

[colhonk]

You need a needle nosed adapter.

 

[KB6930]

I had to chamfer a wee bit off 2 sides of a standard quick release coupling sith the grinder to fit into a small UJ on our old sprayer it worked fine

 

[ACEngineering]

I had to chamfer a wee bit off 2 sides of a standard quick release coupling sith the grinder to fit into a small UJ on our old sprayer it worked fine

Used to do this too, but for the past 15 years i been buying the Alemite 3 jaw couplers, they are slimmer and last well even on my alemite 10,000psi gun which will blow a vap or sparex coupler seal in the first half dozen nipples.

Alemite coupler is part number 308730 i buy them 10 at a time and the last ones i bought in July last year cost £3 each

 

[ACEngineering]

Got an awkward grease nipple in a UJ, all the grease gun ends I have are too fat to get on it.

Anyone know where I can get a thin adaptor, to get in there?

It's on a prop shaft under a little telehandler.

TIA

CB

See my reply in post above.

 

[crashbox]

Used to do this too, but for the past 15 years i been buying the Alemite 3 jaw couplers, they are slimmer and last well even on my alemite 10,000psi gun which will blow a vap or sparex coupler seal in the first half dozen nipples.

Alemite coupler is part number 308730 i buy them 10 at a time and the last ones i bought in July last year cost £3 each

Thanks ACE, who do you get them from?

 

[ACEngineering]

Thanks ACE, who do you get them from?

Lubrication Equipment - Lubrication Systems | Allube

Here at Allube we are the UK's leading lubrication engineers and specialise in the supply and installation of lubrication equipment. Allube Sheffield.

allube.co.uk